Page 16 - IJB-4-1

Lepowsky E and Tasoglu S

sintering. Int J Heat Mass Transf, 46(6): 1103–9. http://doi. for drug delivery. Adv Drug Deliv Rev, 64(Supplement):
org/10.1016/S0017-9310(02)00370-8 49–60. http://doi.org/10.1016/j.addr.2012.09.024
49. Dupin S, Lame O, Barrès C, et al., 2012, Microstructural 61. Gupta P, Vermani K and Garg S, 2002, Hydrogels: From
origin of physical and mechanical properties of polyamide controlled release to pH-responsive drug delivery. Drug
12 processed by laser sintering. Eur Polym J, 48(9): 1611– Discov Today, 7(10): 569–579. http://doi.org/10.1016/
1621. http://doi.org/10.1016/j.eurpolymj.2012.06.007 S1359-6446(02)02255-9
50. Water J J, Bohr A, Boetker J, et al., 2015, Three-dimensional 62. Lee J M and Yeong W Y, 2016, Design and printing
printing of drug-eluting implants: Preparation of an strategies in 3D bioprinting of cell-hydrogels: A review. Adv
antimicrobial polylactide feedstock material. J Pharm Sc, Healthc Mater, 5(22): 2856–2865. http://doi.org/10.1002/
104(3): 1099–1107. http://doi.org/10.1002/jps.24305 adhm.201600435
51. Skowyra J, Pietrzak K and Alhnan M A, 2015, Fabrication 63. Yue K, Trujillo-de Santiago G, Alvarez M M, et al., 2015,
of extended-release patient-tailored prednisolone tablets via Synthesis, properties, and biomedical applications of gelatin
fused deposition modelling (FDM) 3D printing. Eur J Pharm methacryloyl (GelMA) hydrogels. Biomaterials, 73: 254–
Sci, 68: 11–17. http://doi.org/10.1016/j.ejps.2014.11.009 271. http://doi.org/10.1016/j.biomaterials.2015.08.045
52. Genina N, Hollander J, Jukarainen H, et al., 2016, Ethylene 64. Serafim A, Tucureanu C, Petre D-G, et al., 2014, One-
vinyl acetate (EVA) as a new drug carrier for 3D printed pot synthesis of superabsorbent hybrid hydrogels based
medical drug delivery devices. Eur J Pharm Sci, 90: 53–63. on methacrylamide gelatin and polyacrylamide. Effortless
http://doi.org/10.1016/j.ejps.2015.11.005 control of hydrogel properties through composition design.
53. Goyanes A, Buanz A B M, Basit A W, et al., 2014, Fused- New J Chem, 38(7): 3112–3126. http://doi.org/10.1039/
filament 3D printing (3DP) for fabrication of tablets. Int c4nj00161c
J Pharm, 476(1): 88–92. http://doi.org/10.1016/j.ijpharm. 65. Hennink W E and van Nostrum C F, 2012, Novel cross-
2014.09.044 linking methods to design hydrogels. Adv Drug Deliv
54. Goyanes A, Buanz A B M, Hatton G B, et al., 2015, 3D Rev, 64(Supplement): 223–236. http://doi.org/10.1016/
printing of modified-release aminosalicylate (4-ASA and j.addr.2012.09.009
5-ASA) tablets. Eur J Pharm Biopharm, 89: 157–162. http:// 66. Berger J, Reist M, Mayer J M, et al., 2004, Structure and
doi.org/10.1016/j.ejpb.2014.12.003 interactions in covalently and ionically crosslinked chitosan
55. Okwuosa T C, Stefaniak D, Arafat B, et al., 2016, A lower hydrogels for biomedical applications. Eur J Pharm
temperature FDM 3D printing for the manufacture of Biopharm, 57(1): 19–34. http://doi.org/10.1016/S0939-
patient-specific immediate release tablets. Pharm Res, 6411(03)00161-9
33(11): 2704–2712. http://doi.org/10.1007/s11095-016- 67. Akhtar M F, Hanif M and Ranjha N M, 2016, Methods of
1995-0 synthesis of hydrogels … A review. Saudi Pharm J, 24(5):
56. Ahmed E M, 2015, Hydrogel: Preparation, characterization, 554–559. http://doi.org/10.1016/j.jsps.2015.03.022
and applications: A review. J Adv Res, 6(2): 105–121. http:// 68. Yu L, Zhang Z, Zhang H, et al., 2009, Mixing a sol and a
doi.org/10.1016/j.jare.2013.07.006 precipitate of block copolymers with different block ratios
57. Drotleff S, Lungwitz U, Breunig M, et al., 2004, Biomimetic leads to an injectable hydrogel. Biomacromolecules, 10(6):
polymers in pharmaceutical and biomedical sciences. Eur J 1547–1553. http://doi.org/10.1021/bm900145g
Pharm Biopharm, 58(2): 385–407. http://doi.org/10.1016/ 69. Peppas N A, Bures P, Leobandung W, et al., 2000, Hydrogels
j.ejpb.2004.03.018 in pharmaceutical formulations. Eur J Pharm Biopharm,
58. Hoare T R and Kohane D S, 2008, Hydrogels in drug 50(1): 27–46. http://doi.org/10.1016/S0939-6411(00)00090-
delivery: Progress and challenges. Polymer, 49(8): 1993– 4
2007. http://doi.org/10.1016/j.polymer.2008.01.027 70. Qiao M, Chen D, Ma X, et al., 2005, Injectable bio-
59. Bhattarai N, Gunn J and Zhang M, 2010, Chitosan-based degradable temperature-responsive PLGA-PEG-PLGA
hydrogels for controlled, localized drug delivery. Adv copolymers: Synthesis and effect of copolymer composition
Drug Deliv Rev, 62(1): 83–99. http://doi.org/10.1016/ on the drug release from the copolymer-based hydrogels.
j.addr.2009.07.019 Int J Pharm, 294(1–2): 103–112. http://doi.org/10.1016/
60. Qiu Y and Park K, 2012, Environment-sensitive hydrogels j.ijpharm.2005.01.017

International Journal of Bioprinting (2018)–Volume 4, Issue 1 11