Page 106 - IJB-5-1

Near-field electrospinning of a polymer/bioactive glass composite to fabricate 3D biomimetic structures
MO. The authors thank Bradley Bromet for his assistance applications/electrospinning-in-tissue-engineering>. http://
during imaging. doi: 10.5772/65836.
Conflicts of Interest and Funding 8. Giannitelli SM, Mozetic P, Trombetta M, Rainer A. Combined
additive manufacturing approaches in tissue engineering.
No conflicts of interest were reported by the authors. Acta Biomater 2015;24:1-11.

References 9. Daoheng S, Chieh C, Sha L, Lin L. Near-field electrospinning.
Nano Lett 2006;6:839-42.
1. Bružauskaitė I, Bironaitė D, Bagdonas E, Bernotienė E. 10. He XX, Zheng J, Yu GF, You MH, Yu M, Ning X, et al. Near-
Scaffolds and cells for tissue regeneration: Different field electrospinning: Progress and applications. J Phys Chem
scaffold pore sizes-different cell effects. Cytotechnology C 2017;121:8663-78.
2016;68:355-69. 11. Moura D, Souza M T, Liverani L, Rellae G, Luzab GM, Mano JE,
2. Kolan KC, Thomas A, Leu MC, Hilmas GE. In vitro et al. Development of a bioactive glass-polymer composite for
assessment of laser sintered bioactive glass scaffolds with wound healing applications. Mater Sci Eng C 2017;76:224-32.
different pore geometries. Rapid Prototyp J 2015;21:152-8. 12. Liverani L, Lacina J, Roether JA, Boccardi E, Manuela S,
3. Kolan KC, Leu MC, Hilmas GE, Velez M. Effect of Schmuki P, et al. Incorporation of bioactive glass nanoparticles
Architecture and Porosity on Mechanical Properties in electrospun PCL/chitosan fibers by using benign solvents.
of Borate Glass Scaffolds Made by Selective Laser
Sintering. 24 International. SFF symposium. An Additive Bioact Mater 2018;3:55-63.
th
Manufacturing Conference; 2013. p. 816-26. 13. Rahaman MN, Day DE, Bal BS, Fu Q, Jung SB. Bioactive
4. Melchels FP, Barradas A M C, Van Blitterswijk C, de Boer J, glass in tissue engineering. Acta Biomater 2011;7:2355-73.
Feijen J, Grijpma DW. Effects of the architecture of tissue 14. Murphy C, Kolan K, Li W, Semon J, Day D, Leu M. 3D
engineering scaffolds on cell seeding and culturing. Acta bioprinting of stem cells and polymer/bioactive glass
Biomater 2010;6:4208-17. composite scaffolds for tissue engineering. Int J Bioprinting
5. Fu Q, Saiz E, Tomsia AP. Direct ink writing of highly porous 2017;3:54-64.
and strong glass scaffolds for load-bearing bone defects 15. Kolan K, Liu Y, Baldridge J, Leu MC. Solvent based 3D
repair and regeneration. Acta Biomater 2011;7:3547-54. Printing of biopolymer/bioactive glass composite and
6. Ozbolat IT, Hospodiuk M. Current advances and future hydrogel for tissue engineering applications. Procedia CIRP
perspectives in extrusion-based bioprinting. Biomaterials 2017;65:38-43.
2016;76:321-43. 16. Boyde A. Improved digital SEM of cancellous bone: Scanning
7. Li Y, Bou, Akl T, 2016, Electrospinning in Tissue Engineering, direction of detection, through focus for in-focus and sample
Electrospinning, Sajjad Haider and Adnan Haider, Intech orientation. J Anat 2003;202:183-94.
Open. Available from: <https://www.intechopen.com/ 17. Jung S. Borate Based Bioactive Glass Scaffolds for Hard and
books/electrospinning-material-techniques-and-biomedical- Soft Tissue Engineering. Doctoral Dissertations; 2010. p. 2075.

6 International Journal of Bioprinting (2019)–Volume 5, Issue 1