Page 99 - IJB-5-1

Designs and Applications of EHD 3D Printing
8. Park J, Hwang J, 2014, Fabrication of a flexible Ag–grid pulsating cone–jet mode of electrohydrodynamic jetting for
transparent electrode using ac based electrohydrodynamic jet plane, hole, and pin type electrodes. J Appl Phys, 108(10):
printing. J Phys D: Appl Phys, 47(40): 4051021–4051027. 10280401–10280410. https://doi.org/10.1063/1.3511685.
https://doi.org/10.1088/0022-3727/47/40/405102. 20. Lee S, Kichul A, Sanguk S, et al., 2013, Satellite/spray
9. Park J U, Hardy M, Kang S J, et al., 2007, High–resolution suppression in electrohydrodynamic printing with a gated
electrohydrodynamic jet printing. Nat Mater, 6(10): 782–789. head. Appl Phys Lett, 103(13): 1335061–1335064. https://
https://doi.org/10.1038/nmat1974. doi.org/10.1063/1.4822264.
10. Barton K, Mishra S, Shorter K A, et al., 2010, A desktop 21 . Tse L, Barton K, 2014, A field shaping printhead for high–
electrohydrodynamic jet printing system. Mechatronics, 20(5): resolution electrohydrodynamic jet printing onto non–
611–616. https://doi.org/10.1016/j.mechatronics.2010.05.004. conductive and uneven surfaces. Appl Phys Lett, 104(14):
11. Sutanto E, Shigeta K, Kim Y K, et al., 2012, A multimaterial 1435101–1435104. https://doi.org/10.1063/1.4871103.
electrohydrodynamic jet (E–jet) printing system. 22. Barton K, Mishra S, Alleyne A, et al., 2011, Control of
J Micromech Microeng, 22(4): 4500801–4500811. https://doi. high–resolution electrohydrodynamic jet printing. Contr
org/10.1088/0960-1317/22/4/045008. Eng Pract, 19: 1266–1273. https://doi.org/10.1016/j.
12. Choi K H, Khan A, Rahman K, et al., 2011a, Effects of conengprac.2011.05.009.
nozzles array configuration on cross-talk in multi-nozzle 23. Jaworek A, Sobczyk A, 2008, Electrospraying route to
electrohydrodynamic inkjet printing head. J Electrostat, nanotechnology: An overview. J Electrostat, 66(3–4): 197–
69(4): 380–387. https://doi.org/10.1016/j.elstat.2011.04.017. 219. https://doi.org/10.1016/j.elstat.2007.10.001.
13. Tran S B, Byan D, Nguyen V D, et al., 2010, Polymer–based 24. Onses M S, Sutanto E, Ferreira P M, et al., 2015,
electrospray device with multiple nozzles to minimize end Mechanisms, capabilities, and applications of high–
effect phenomenon. J Electrostat, 68(2): 138–144. https:// resolution electrohydrodynamic jet printing. Small J, 11(34):
doi.org/10.1016/j.elstat.2009.11.011. 4237–4266. https://doi.org/10.1002/smll.201500593; https://
14. Lee J S, Kim S, Kim Y, et al., 2008, Design and evaluation doi.org/10.1002/smll.201570209.
of a silicon based multi–nozzle for addressable jetting using 25. Wang K, Paine M D, Stark J P W, 2009a, Freeform fabrication
a controlled flow rate in electrohydrodynamic jet printing. of metallic patterns by unforced electrohydrodynamic jet
Appl Phys Lett, 93(24): 2431141–2431143. https://doi. printing of organic silver ink. J Mater Sci: Mater Electron,
org/10.1063/1.3049609. 20(11): 1154–1157. https://doi.org/10.1007/s10854-008-
15. Tran S B, Byun D, Lee S, 2007, Experimental and theoretical 9843-6.
study of a cone–jet for an electrospray microthruster 26. Wang K, Paine M D, Stark J P W, 2009b, Fully voltage–
considering the interference effect in an array of nozzles. controlled electrohydrodynamic jet printing of conductive
J Aerosol Sci, 38(9): 924–934. https://doi.org/10.1016/j. silver tracks with a sub–100μm linewidth. J Appl Phys,
jaerosci.2007.07.003. 106(2): 249071–249074. https://doi.org/10.1063/1.3176952.
16. Khan A, Rahman K, Hyun M, et al., 2011, Multi–nozzle 27. Choi K H, Khalid R R, Muhammad N M, et al., 2011,
electrohydrodynamic inkjet printing of silver colloidal Electrohydrodynamic inkjet-micro pattern fabrication for
solution for the fabrication of electrically functional printed electronics application. In: Recent Advances in
microstructures. Appl Phys A, 104(4): 1113–1120. https://doi. Nanofabrication Techniques and Applications. London, UK:
org/10.1007/s00339-011-6386-0. InTech. p. 547-568
17. Park H, Kim K, Kim S, 2004, Effects of a guard plate on 28. Prasetyo F D, Yudistira H T, Nguyen V D, et al., 2013, Ag
the characteristics of an electrospray in the cone–jet mode. dot morphologies printed using electrohydrodynamic (EHD)
J Aerosol Sci, 35(11): 1295–1312. https://doi.org/10.1016/j. jet printing based on a drop–on–demand (DOD) operation.
jaerosci.2004.05.012. J Micromech Microeng, 23(9): 9502801–9502810. https://
18. Zhang X, Isao K, Kunihiko U, et al., 2013, Direct observation doi.org/10.1088/0960-1317/23/9/095028.
and characterization of the generation of organic solvent 29. Youn D H, Kim S, Yang Y, et al., 2009, Electrohydrodynamic
droplets with and without triglyceride oil by electrospraying. micropatterning of silver ink using near–field
Colloids Surf A: Physicochem Eng Asp, 436: 937–943. electrohydrodynamic jet printing with tilted–outlet nozzle.
https://doi.org/10.1016/j.colsurfa.2013.07.032. Appl Phys A, 96(4): 933–938. https://doi.org/10.1007/
19. Kim H, Song J, Chung J, et al., 2010, Onset condition of s00339-009-5262-7.

10 International Journal of Bioprinting (2019)–Volume 5, Issue 1