Page 13 - IJB-6-4

He, et al.
References 9. Rajzer I, Kurowska A, Jabłoński A, et al., 2018, Layered
Gelatin/PLLA Scaffolds Fabricated by Electrospinning and
1. Balazy A, Toivola M, Adhikari A, et al., 2006, Do N95 3D Printing- for Nasal Cartilages and Subchondral Bone
Respirators Provide 95% Protection Level Against Airborne Reconstruction. Mater Des, 155:297–306. DOI: 10.1016/j.
Viruses, and how Adequate are Surgical Masks? Am J Infect matdes.2018.06.012.
Control, 34:51–7. DOI: 10.1016/j.ajic.2005.08.018. 10. Naghieh S, Foroozmehr E, Badrossamay M, et al., 2017,
2. Zhu N, Zhang D, Wang W, et al., 2020, A Novel Coronavirus Combinational Processing of 3D Printing and Electrospinning
from Patients with Pneumonia in China, 2019. N Engl J Med, of Hierarchical Poly(Lactic Acid)/Gelatin-forsterite Scaffolds
382:727–33. DOI: 10.1056/NEJMoa2001017. as a Biocomposite: Mechanical and Biological Assessment.
3. Leung NH, Chu DK, Shiu EY, et al., 2020, Respiratory Virus Mater Des, 133:128–35. DOI: 10.31224/osf.io/yt6w7.
Shedding in Exhaled Breath and Efficacy of Face Masks. Nat 11. Mendoza-Buenrostro C, Rodriguez CL, 2015, Hybrid
Med, 26:676–80. DOI:10.1038/s41591-020-0843-2. Fabrication of a 3D Printed Geometry Embedded with PCL
4. Ronkay FC, 2020, The Coronavirus and Plastics. Express Polym Nanofibers for Tissue Engineering Applications. Procedia
Lett, 14:510–1. DOI: 10.3144/expresspolymlett.2020.41. Eng, 110:128–34. DOI: 10.1016/j.proeng.2015.07.020.
5. Wang SX, Yap CC, He J, et al., 2016, Electrospinning: A 12. Kozior T, Mamun A, Trabelsi M, et al., 2019, Electrospinning
Facile Technique for Fabricating Functional Nanofibers for on 3D Printed Polymers for Mechanically Stabilized Filter
Environmental Applications. Nanotechnol Rev, 5: 51-73. Composites. Polymers (Basel), 11:2034. DOI: 10.3390/
DOI: 10.1515/ntrev-2015-0065. polym11122034.
6. Liu Y, Park M, Ding B, et al., 2015, Facile Electrospun 13. Kozior T, Trabelsi M, Mamun A, et al., 2019, Stabilization
Polyacrylonitrile/poly(Acrylic Acid) Nanofibrous of Electrospun Nanofiber Mats Used for Filters by 3D
Membranes for High Efficiency Particulate Air Filtration. Printing. Polymers (Basel), 11:1618. DOI: 10.3390/
Fiber Polym, 16:629–33. DOI: 10.1007/s12221-015-0629-1. polym11101618.
7. Zhang S, Tang N, Cao L, et al., 2016, Highly Integrated 14. Naghieh S, Badrossamay M, Foroozmehr E, et al., 2017,
Polysulfone/Polyacrylonitrile/Polyamide-6 Air Filter Combination of PLA Micro-fibers and PCL-Gelatin
for Multilevel Physical Sieving Airborne Particles. ACS Nano-fibers for Development of Bone Tissue Engineering
Appl Mater Interfaces, 8:29062–72. DOI: 10.1021/ Scaffolds. Int J Swarm Intell Evol Comput, 6:1000150. DOI:
acsami.6b10094. 10.4172/2090-4908.1000150.
8. Xu J, Liu C, Hsu PC, et al., 2016, Roll-to-Roll Transfer of 15. Sweeney CB, Lackey BA, Pospisil MJ, et al., 2017, Welding
Electrospun Nanofiber Film for High-Efficiency Transparent of 3D-printed Carbon Nanotube-polymer Composites by
Air Filter. Nano Lett, 16:1270–5. DOI: 10.1021/acs. Locally Induced Microwave Heating. Sci Adv, 3:e1700262.
nanolett.5b04596.s001. DOI: 10.1126/sciadv.1700262.

International Journal of Bioprinting (2020)–Volume 6, Issue 4 9