Page 247 - IJB-8-4

Wang, et al.
of chest wall defect. Ann Thorac Surg, 107:921–8. https://doi.org/10.1016/S0142-9612(01)00300-3
https://doi.org/10.1016/j.athoracsur.2018.09.044 27. Toth JM, Wang M, Estes BT, et al., 2006, Polyetheretherketone
15. Aragon J, Perez Mendez I, 2016, Dynamic 3D printed as a biomaterial for spinal applications. Biomaterials,
titanium copy prosthesis: A novel design for large chest wall 27:324–34.
resection and reconstruction. J Thorac Dis, 8:E385–9. https://doi.org/10.1016/j.biomaterials.2005.07.011
https://doi.org/10.21037/jtd.2016.03.94 28. Stratton-Powell AA, Pasko KM, Brockett CL, et al., 2016,
16. Kurtz SM, editor. 2019, An overview of PEEK biomaterials. The biologic response to polyetheretherketone (PEEK) wear
In: PEEK Biomaterials Handbook. 2 ed., Ch. 1. Norwich, particles in total joint replacement: A systematic review. Clin
nd
NY: William Andrew Publishing. p3–9. Orthop Relat Res, 474:2394–404.
17. Bessard E, De Almeida O, Bernhart G, 2014, Unified https://doi.org/10.1007/s11999-016-4976-z
isothermal and non-isothermal modelling of neat PEEK 29. Wang L, Liu X, Jiang T, et al., 2020, Three-dimensional
crystallization. J Therm Anal Calorim, 115:1669–78. printed polyether-ether-ketone implant for extensive chest wall
https://doi.org/10.1007/s10973-013-3308-8 reconstruction: A case report. Thorac Cancer, 11:2709–12.
18. Katti KS, 2004, Biomaterials in total joint replacement. https://doi.org/10.1111/1759-7714.13560
Colloids Surf B Biointerfaces, 39:133–42. 30. Lethaus B, Ter Laak MP, Laeven P, et al., 2011, A treatment
https://doi.org/10.1016/j.colsurfb.2003.12.002 algorithm for patients with large skull bone defects and first
19. Stober EJ, Seferis JC, Keenan JD, 1984, Characterization results. J Craniomaxillofac Surg, 39:435–40.
and exposure of polyetheretherketone (PEEK) to fluid https://doi.org/10.1016/j.jcms.2010.10.003
environments. Polymer, 25:1845–52. 31. Kim MM, Boahene KD, Byrne PJ, 2009, Use of customized
https://doi.org/10.1016/0032-3861(84)90260-X polyetheretherketone (PEEK) implants in the reconstruction
20. Boinard E, Pethrick RA, MacFarlane CJ, 2000, The influence of complex maxillofacial defects. Arch Facial Plast Surg,
of thermal history on the dynamic mechanical and dielectric 11:53–7.
studies of polyetheretherketone exposed to water and brine. https://doi.org/10.1001/archfaci.11.1.53
Polymer, 41:1063–76. 32. Najeeb S, Zafar MS, Khurshid Z, et al., 2016, Applications
https://doi.org/10.1016/S0032-3861(99)00259-1 of polyetheretherketone (PEEK) in oral implantology and
21. Bishop MT, Karasz FE, Russo PS, et al., 1985, Solubility prosthodontics. J Prosthodont Res, 60:12–9.
and properties of a poly(aryl ether ketone) in strong acids. https://doi.org/10.1016/j.jpor.2015.10.001
Macromolecules, 18:86–93. 33. Panayotov IV, Orti V, Cuisinier F, et al., 2016,
https://doi.org/10.1021/ma00143a014 Polyetheretherketone (PEEK) for medical applications.
22. Li HM, Fouracre RA, Given MJ, et al., 1999, The effects on J Mater Sci Mater Med, 27:118.
polyetheretherketone and polyethersulfone of electron and/spl https://doi.org/10.1007/s10856-016-5731-4
gamma/irradiation. IEEE Trans Dielectr Electr Insul, 6:295–303. 34. Seaman S, Kerezoudis P, Bydon M, et al., 2017, Titanium vs.
https://doi.org/10.1109/94.775614 polyetheretherketone (PEEK) interbody fusion: Meta-analysis
23. Kurtz SM, Devine JN, 2007, PEEK biomaterials in trauma, and review of the literature. J Clin Neurosci, 44:23–9.
orthopedic, and spinal implants. Biomaterials, 28:4845–69. https://doi.org/10.1016/j.jocn.2017.06.062
https://doi.org/10.1016/j.biomaterials.2007.07.013 35. Zanjanijam AR, Major I, Lyons JG, et al., 2020, Fused
24. Ouyang L, Chen M, Wang D, et al., 2019, Nano Textured filament fabrication of PEEK: A review of process-structure-
PEEK Surface for Enhanced Osseointegration. ACS Biomater property relationships. Polymers (Basel), 12:1665.
Sci Eng, 5:1279–89. https://doi.org/10.3390/polym12081665
https://doi.org/10.1021/acsbiomaterials.8b01425 36. Sun C, Jin Z, Wang L, et al., 2017, In 8 WACBE World
th
25. Han X, Yang D, Yang C, et al., 2019, Carbon fiber reinforced Congress on Bioengineering.
PEEK composites based on 3D-printing technology for 37. Kang J, Wang L, Yang C, et al., 2018, Custom design and
orthopedic and dental applications. J Clin Med, 8:240. biomechanical analysis of 3D-printed PEEK rib prostheses.
https://doi.org/10.3390/jcm8020240 Biomech Model Mechanobiol, 17:1083–92.
26. Katzer A, Marquardt H, Westendorf J, et al., 2002, https://doi.org/10.1007/s10237-018-1015-x
Polyetheretherketone—cytotoxicity and mutagenicity 38. Zhang C, Wang L, Kang J, et al., 2020, Bionic design and
in vitro. Biomaterials, 23:1749–59. verification of 3D printed PEEK costal cartilage prosthesis.

International Journal of Bioprinting (2022)–Volume 8, Issue 4 239