Page 335 - IJB-9-3

International Journal of Bioprinting New fibrillar collagen for 3D printing and bioprinting

2. Zhang B, Gao L, Ma L, et al., 2019, 3D bioprinting: A novel 13. Heid S, Boccaccini AR, 2020, Advancing bioinks for 3D
avenue for manufacturing tissues and organs. Engineering, bioprinting using reactive fillers: A review. Acta Biomater,
5(4):777–794. 113:1–22.
https://doi.org/10.1016/J.ENG.2019.03.009 https://doi.org/10.1016/j.actbio.2020.06.040
3. Ng WL, Chua CK, Shen YF, 2019, Print me an organ! Why 14. Schwab A, Levato R, D’Este M, et al., 2020, Printability
we are not there yet. Prog Polym Sci, 97(101145):1–45. and shape fidelity of bioinks in 3D bioprinting. Chem Rev,
https://doi.org/10.1016/J.PROGPOLYMSCI.2019.101145 120(19):11028–11055.
4. Ashammakhi N, Ahadian S, Xu C, et al., 2019, Bioinks https://doi.org/10.1021/acs.chemrev.0c00084
and bioprinting technologies to make heterogeneous and 15. Groll J, Burdick JA, Cho DW, et al., 2019, A definition
biomimetic tissue constructs. Mater Today Bio, 1(100008):1–23. of bioinks and their distinction from biomaterial inks.
https://doi.org/10.1016/J.MTBIO.2019.100008 Biofabrication, 11(1):013001.
https://doi.org/10.1088/1758-5090/aaec52
5. ASTM International, 2021, ISO/ASTM 52900:2021(E).
Additive manufacturing—General Principles—Fundamentals 16. Postlethwaite AE, Seyer JM, Kang AH, 1978, Chemotactic
and Vocabulary. ASTM International, Geneva, 1–5. attraction of human fibroblasts to type I, II, and III collagens
and collagen-derived peptides. Proc Natl Acad Sci U S A,
6. Zhuang P, Ng WL, An J, et al., 2019, Layer-by-layer 75(2):871.
ultraviolet assisted extrusion-based (UAE) bioprinting of
hydrogel constructs with high aspect ratio for soft tissue https://doi.org/10.1073/PNAS.75.2.871
engineering applications. PLoS One, 14(6):e0216776. 17. Min Lee J, Kang Qiang Suen S, Long Ng W, et al., 2021,
https://doi.org/10.1371/JOURNAL.PONE.0216776 Bioprinting of collagen: Considerations, potentials, and
applications. Macromol Biosci, 21(1):2000280.
7. Jiang T, Munguia-Lopez JG, Flores-Torres S, et al., 2019,
Extrusion bioprinting of soft materials: An emerging technique https://doi.org/10.1002/MABI.202000280
for biological model fabrication. Appl Phys Rev, 6(1):011310. 18. Marques CF, Diogo GS, Pina S, et al., 2019, Collagen-
https://doi.org/10.1063/1.5059393 based bioinks for hard tissue engineering applications: A
comprehensive review. J Mater Sci Mater Med, 30(3):1–12.
8. Li X, Liu B, Pei B, et al., 2020, Inkjet bioprinting of
biomaterials. Chem Rev, 120(19):10793–10833. https://doi.org/10.1007/S10856-019-6234-X/TABLES/1
19. Damodaran S, Parkin KL, 2017, Philadelphia, Pennsylvania,
https://doi.org/10.1021/ACS.CHEMREV.0C00008/ASSET/
IMAGES/LARGE/CR0C00008_0028.JPEG United States. Fennema’s Food Chemistry, 5th edn, CRC
Press, Philadelphia, Pennsylvania, United States.
9. Ng WL, Huang X, Shkolnikov V, et al., 2022, Controlling 20. Schrieber R, Gareis H, 2007, Redhill, SURRE, United
droplet impact velocity and droplet volume: Key factors to
achieving high cell viability in sub-nanoliter droplet-based Kingdom. Gelatine Handbook: Theory and Industrial
Practice, Wiley-VCH, Redhill, SURRE, United Kingdom.
bioprinting. Int J Bioprinting, 8(1):1–17.
21. Schmidt MM, Dornelles RCP, Mello RO, et al., 2016,
https://doi.org/10.18063/IJB.V8I1.424
Collagen extraction process. Int Food Res J, 23(3):913–922.
10. Ng WL, Lee JM, Zhou M, et al., 2020, Vat polymerization- Accessed: July 14, 2022. [Online]. Available:
based bioprinting—Process, materials, applications and https://www.cabdirect.org/cabdirect/abstract/20163160817
regulatory challenges. Biofabrication, 12(2):022001.
22. Suurs P, Barbut S, 2020, Collagen use for co-extruded sausage
https://doi.org/10.1088/1758-5090/AB6034 casings—A review. Trends Food Sci Technol, 102:91–101.
11. Li W, Mille LS, Robledo JA, et al., 2020, Recent advances https://doi.org/10.1016/J.TIFS.2020.06.011
in formulating and processing biomaterial inks for vat
polymerization-based 3D printing. Adv Healthc Mater, 23. Stepanovska J, Otahal M, Hanzalek K, et al., 2021, pH
9(15):2000156. modification of high-concentrated collagen bioinks as a
factor affecting cell viability, mechanical properties, and
https://doi.org/10.1002/ADHM.202000156 printability. Gels, 7(4):252.
12. Garcia-Villen F, Ruiz-Alonso S, Lafuente-Merchan M, et al., https://doi.org/10.3390/GELS7040252
2021, Clay minerals as bioink ingredients for 3D printing 24. Osidak EO, Kozhukhov VI, Osidak MS, et al., 2020, Collagen
and 3D bioprinting: Application in tissue engineering as bioink for bioprinting: A comprehensive review. Int J
and regenerative medicine. Pharmaceutics, 13(1806):1–46 Bioprinting, 6(3):1–10.
[Online]. Available:
https://doi.org/10.18063/IJB.V6I3.270
https://pubmed.ncbi.nlm.nih.gov/34834221/

Volume 9 Issue 3 (2023) 327 https://doi.org/10.18063/ijb.712