Page 160 - IJB-9-5

International Journal of Bioprinting Guide about the effects of sterilization on 3D-printed materials for medicine

Figure 4. ABS sterilization comparison. Data are represented as mean values. N = 3 ABS Control/group; N = 3 ABS HPO/group.

Table 4. Mechanical properties of the 3D-printed ABS
Parameters Mechanical properties
Tensile strength (MPa) Young’s modulus (MPa) Elongation at yield (%) Elongation at break (%)
Control 23.01 ± 1.32 1352 ± 53 1.73 ± 0.08 4.35 ± 0.85
HPO 23.57 ± 1.42 1271 ± 23 1.79 ± 0.12 4.73 ± 0.76
Data are represented as mean ± SD. N = 3 ABS Control/group; N = 3 ABS HPO/group.

Figure 5. MED610 sterilization comparison. Data are represented as mean values. N = 3 MED610 Control/group; N = 3 MED610 HPO/group; N = 3
MED610 AU121/group; N = 3 MED610 AU134/group.

Volume 9 Issue 5 (2023) 152 https://doi.org/10.18063/ijb.756