Page 50 - MSAM-1-1

Materials Science in Additive Manufacturing Crack-free AA7075 with Zr modification via LPBF

alloy with Er additions. J Mater Sci Technol, 99: 61–72. https://doi.org/10.1016/j.intermet.2020.107008
https://doi.org/10.1016/j.jmst.2021.05.031 36. Zhang X, Xiao Z, Yu W, et al., 2022, Influence of erbium
29. Qi Y, Hu Z, Zhang H, et al., 2021, High strength Al-Li alloy addition on the defects of selective laser-melted 7075
development for laser powder bed fusion. Addit Manuf, aluminium alloy. Virtual Phys Prototyp, 17: 406-418.
47: 102249. https://doi.org/10.1080/17452759.2021.1990358
https://doi.org/10.1016/j.addma.2021.102249 37. Martin A, Vilanova M, Gil E, et al., 2022, Influence of the
30. Otani Y, Sasaki S, 2020, Effects of the addition of silicon Zr content on the processability of a high strength Al-Zn-
to 7075 aluminum alloy on microstructure, mechanical Mg-Cu-Zr alloy by laser powder bed fusion. Mater Charact,
properties, and selective laser melting processability. Mater 183: 111650.
Sci Eng A, 777: 139079. https://doi.org/10.1016/j.matchar.2021.111650
https://doi.org/10.1016/j.msea.2020.139079 38. Hojjatzadeh SMH, Parab ND, Guo Q, et al., 2020,
31. Glerum JA, Kenel C, Sun T, et al., 2020, Synthesis of Direct observation of pore formation mechanisms
precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys during LPBF additive manufacturing process and high
via selective laser melting of elemental powder blends. Addit energy density laser welding. Int J Mach Tools Manuf,
Manuf, 36: 101461. 153: 103555. https://doi.org/10.1016/
https://doi.org/10.1016/j.addma.2020.101461 j.ijmachtools.2020.103555
32. Zhu Y, Zhao Y, Chen B, 2022, A study on Sc- and Zr-modified 39. Gu D, Yuan P, 2015, Thermal evolution behavior and
Al-Mg alloys processed by selective laser melting. Mater Sci fluid dynamics during laser additive manufacturing of Al-
Eng A, 833: 142516. based nanocomposites: Underlying role of reinforcement
weight fraction. J Appl Phys, 118: 233109.
https://doi.org/10.1016/j.msea.2021.142516
https://doi.org/10.1063/1.4937905
33. Mehta A, Zhou L, Huynh T, et al., 2021, Additive
manufacturing and mechanical properties of the dense and 40. Gu D, Ma C, Xia M, et al., 2017, A Multiscale understanding
crack free Zr-modified aluminum alloy 6061 fabricated by of the thermodynamic and kinetic mechanisms of laser
the laser-powder bed fusion. Addit Manuf, 41: 101966. additive manufacturing. Engineering PRC, 3: 675-684.
https://doi.org/10.1016/j.addma.2021.101966 https://doi.org/10.1016/J.ENG.2017.05.011
34. Hyer H, Zhou L, Park S, et al., 2022, Elimination of 41. Khvan AV, Eskin DG, Starodub KF, et al., 2018, New insights
extraordinarily high cracking susceptibility of aluminum into solidification and phase equilibria in the Al-Al Zr
3
alloy fabricated by laser powder bed fusion. J Mater Sci system: Theoretical and experimental investigations.
Technol, 103: 50–58. J Alloys Compd, 743: 626–638.
https://doi.org/10.1016/j.jmst.2021.06.023 https://doi.org/10.1016/j.jallcom.2018.02.023
35. Li P, Li R, Yang H, et al., 2021, Selective laser melting of 42. Uddin SZ, Murr LE, Terrazas CA, et al., 2018, Processing
Al-3.48Cu-2.03Si-0.48Sc-0.28Zr alloy: Microstructure and characterization of crack-free aluminum 6061 using
evolution, properties and metallurgical defects. high-temperature heating in laser powder bed fusion
Intermetallics, 129: 107008. additive manufacturing. Addit Manuf, 22: 405–415. https://
doi.org/10.1016/j.addma.2018.05.047

Volume 1 Issue 1 (2022) 11 https://doi.org/10.18063/msam.v1i1.4