Page 49 - MSAM-1-1

Materials Science in Additive Manufacturing Crack-free AA7075 with Zr modification via LPBF

7. Yu WH, Sing SL, Chua CK, et al., 2019, Particle-reinforced 18. Aucott L, Dong H, Mirihanage W, et al., 2018, Revealing
metal matrix nanocomposites fabricated by selective laser internal flow behaviour in arc welding and additive
melting: A state of the art review. Prog Mater Sci, 104: 330– manufacturing of metals. Nat Commun, 9: 5414.
379. https://doi.org/10.1038/s41467-018-07900-9
https://doi.org/10.1016/j.pmatsci.2019.04.006
19. Hyer H, Zhou L, Mehta A, et al., 2021, Composition-
8. Xie B, Zhao MC, Xu R, et al., 2020, Biodegradation, dependent solidification cracking of aluminum-silicon alloys
antibacterial performance, and cytocompatibility of a novel during laser powder bed fusion. Acta Mater, 208: 116698.
ZK30-Cu-Mn biomedical alloy produced by selective laser https://doi.org/10.1016/j.actamat.2021.116698
melting. Int J Bioprinting, 7: 300–300.
20. Hyer H, Zhou L, Mehta A, et al., 2021, Effects of alloy
https://doi.org/10.18063/ijb.v7i1.300 composition and solid-state diffusion kinetics on powder
9. Xue L, Atli KC, Zhang C, et al., 2022, Laser powder bed bed fusion cracking susceptibility. J Phase Equilib Diffus,
fusion of defect-free NiTi shape memory alloy parts with 42: 5–13.
superior tensile superelasticity. Acta Mater, 229: 117781. https://doi.org/10.1007/s11669-020-00844-y
https://doi.org/10.1016/j.actamat.2022.117781 21. Riener K, Pfalz T, Funcke F, et al., 2022, Processability of
10. Mukherjee T, DebRoy T, 2018, Mitigation of lack of fusion high-strength aluminum 6182 series alloy via laser powder
defects in powder bed fusion additive manufacturing. bed fusion (LPBF). Int J Adv Manuf Technol, 119: 4963–
J Manuf Process, 36: 442–449. 4977.
https://doi.org/10.1016/j.jmapro.2018.10.028 https://doi.org/10.1007/s00170-022-08673-8
11. Yonehara M, Kato C, Ikeshoji TT, et al., 2021, Correlation 22. Tan Q, Fan Z, Tang X, et al., 2021, A novel strategy to
between surface texture and internal defects in laser powder- additively manufacture 7075 aluminium alloy with selective
bed fusion additive manufacturing. Sci Rep UK, 11: 22874. laser melting. Mater Sci Eng A, 821: 141638.

https://doi.org/10.1038/s41598-021-02240-z https://doi.org/10.1016/j.msea.2021.141638
12. Moon S, Ma R, Attardo R, et al., 2021, Impact of surface 23. Li G, Li X, Guo C, et al., 2022, Investigation into the effect of
and pore characteristics on fatigue life of laser powder bed energy density on densification, surface roughness and loss
fusion Ti-6Al-4V alloy described by neural network models. of alloying elements of 7075 aluminium alloy processed by
Sci Rep UK, 11: 20424. laser powder bed fusion. Opt Laser Technol, 147: 107621.
https://doi.org/10.1038/s41598-021-99959-6 https://doi.org/10.1016/j.optlastec.2021.107621
13. Tang M, Pistorius PC, Beuth JL, 2017, Prediction of lack- 24. Stopyra W, Gruber K, Smolina I, et al., 2020, Laser powder
of-fusion porosity for powder bed fusion. Addit Manuf, bed fusion of AA7075 alloy: Influence of process parameters
14: 39–48. on porosity and hot cracking. Addit Manuf, 35: 101270.
https://doi.org/10.1016/j.addma.2016.12.001 https://doi.org/10.1016/j.addma.2020.101270
14. Plessis AD, 2019, Effects of process parameters on porosity 25. Zhu Z, Ng FL, Seet HL, et al., 2021, Superior mechanical
in laser powder bed fusion revealed by X-ray tomography. properties of a selective-laser-melted AlZnMgCuScZr alloy
Addit Manuf, 30: 100871. enabled by a tunable hierarchical microstructure and dual-
nanoprecipitation. Mater Today,
https://doi.org/10.1016/j.addma.2019.100871
https://doi.org/10.1016/j.mattod.2021.11.019
15. Leung CL, Marussi S, Atwood RC, et al., 2018, In situ
X-ray imaging of defect and molten pool dynamics in laser 26. Lei Z, Bi J, Chen Y, et al., 2019, Effect of energy density on
additive manufacturing. Nat Commun, 9: 1355. formability, microstructure and micro-hardness of selective
laser melted Sc- and Zr- modified 7075 aluminum alloy.
https://doi.org/10.1038/s41467-018-03734-7 Powder Technol, 356: 594–606.
16. Yu W, Sing SL, Chua CK, et al., 2019, Influence of re-melting https://doi.org/10.1016/j.powtec.2019.08.082
on surface roughness and porosity of AlSi10Mg parts 27. Shrivastava V, Singh P, Gupta GK, et al., 2021, Synergistic
fabricated by selective laser melting. J Alloys Compd, effect of heat treatment and reinforcement content on the
792: 574–581.
microstructure and corrosion behavior of Al-7075 alloy
https://doi.org/10.1016/j.jallcom.2019.04.017 based nanocomposites. J Alloys Compd, 857: 157590.
17. Martin JH, Yahata BD, Hundley JM, et al., 2017, 3D printing https://doi.org/10.1016/j.jallcom.2020.157590
of high-strength aluminium alloys. Nature, 549: 365–369.
28. Liu L, Jiang JT, Cui XY, et al., 2022, Correlation between
https://doi.org/10.1038/nature23894 precipitates evolution and mechanical properties of Al-Sc-Zr

Volume 1 Issue 1 (2022) 10 https://doi.org/10.18063/msam.v1i1.4