Page 45 - MSAM-1-2

Materials Science in Additive Manufacturing Intense pulsed light sintering of conductive film

9. Zhang H, Moon SK, Ngo TH, 2020, 3D printed electronics printed electronics: A review. Nanoscale, 8: 13131–13154.
of non-contact ink writing techniques: status and promise. https://doi.org/10.1039/c6nr03054h
Int J Precis Eng Manuf Green Technol, 7: 511–524.
21. Goh GL, Tay MF, Lee JM, et al., 2021, Potential of printed
https://doi.org/10.1007/s40684-019-00139-9
electrodes for electrochemical impedance spectroscopy
10. Goh GL, Zhang H, Chong TH, et al., 2021, 3D printing of (EIS): Toward membrane fouling detection. Adv Electron
multilayered and multimaterial electronics: A review. Adv Mater, 7: 2100043.
Electron Mater, 7: 2100445.
https://doi.org/10.1002/aelm.202100043
https://doi.org/10.1002/aelm.202100445
22. Jiang J, Bao B, Li M, et al., 2016, Fabrication of transparent
11. Goh GL, Ma J, Chua KL, et al., 2016, Inkjet-printed patch multilayer circuits by inkjet printing. Adv Mater,
antenna emitter for wireless communication application. 28: 1420–1426.
Virtual Phys Prototyp, 11: 289–294.
https://doi.org/10.1002/adma.201503682
https://doi.org/10.1080/17452759.2016.1229802
23. Agarwala S, Goh GL, Le TS, et al., 2018, Wearable bandage-
12. Goh GL, Shweta A, Yeong WY, 2018, High resolution aerosol based strain sensor for home healthcare: Combining 3D aerosol
jet printing of conductive ink for stretchable electronics. jet printing and laser sintering. ACS Sensors, 4: 218–226.
In: Proceedings of the 3 International Conference on https://doi.org/10.1021/acssensors.8b01293
rd
Progress in Additive Manufacturing (PRO-AM). Nanyang
Technological University, Singapore, p109–114. 24. Pan H, Ko SH, Grigoropoulos CP, 2008, Thermal sintering of
solution-deposited nanoparticle silver ink films characterized
13. Agarwala S, Goh GL, Yeong WY, 2018, Aerosol jet printed pH
sensor based on carbon nanotubes for flexible electronics. In: by spectroscopic ellipsometry. Appl Phys Lett, 93: 234104.
Proceedings of the 3 International Conference on Progress https://doi.org/10.1063/1.3043583
rd
in Additive Manufacturing (Pro-AM 2018), Singapore. 25. Allen ML, Aronniemi M, Mattila T, et al., 2008, Electrical
14. Goh GL, Agarwala S, Yeong WY, 2018, High resolution sintering of nanoparticle structures. Nanotechnology,
aerosol jet printing of conductive ink for stretchable 19: 175201.
electronics. In: Proceedings of the 3 International https://doi.org/10.1088/0957-4484/19/17/175201
rd
Conference on Progress in Additive Manufacturing
(Pro-AM 2018), Singapore. 26. Tan HW, Saengchairat N, Goh GL, et al., 2020, Induction
sintering of silver nanoparticle inks on polyimide substrates.
15. Goh GL, Dikshit V, Koneru R, et al., 2022, Fabrication Adv Mater Technol, 5: 1900897.
of design-optimized multifunctional safety cage with
conformal circuits for drone using hybrid 3D printing https://doi.org/10.1002/admt.201900897
technology. Int J Adv Manuf Technol, 120: 2573–2586. 27. Nam HJ, Kang SY, Park JY, et al., 2019, Intense pulse light
https://doi.org/10.1007/s00170-022-08831-y sintering of an Ag microparticle-based, highly stretchable,
and conductive electrode. Microelectron Eng, 215: 111012.
16. Jiang P, Ji Z, Zhang X, et al., 2018, Recent advances in
direct ink writing of electronic components and functional https://doi.org/10.1016/j.mee.2019.111012
devices. Prog Addit Manuf, 3: 65–86. 28. Jang YR, Joo SJ, Chu JH, et al., 2020, A review on intense pulsed
https://doi.org/10.1007/s40964-017-0035-x light sintering technologies for conductive electrodes in printed
electronics. Int J Precis Eng Manuf Green Technol, 8: 327–363.
17. Wilkinson N, Smith M, Kay R, et al., 2019, A review of aerosol
jet printing a non-traditional hybrid process for micro- https://doi.org/10.1007/s40684-020-00193-8
manufacturing. Int J Adv Manuf Technol, 105: 4599–4619. 29. Moores A, Goettmann F, 2006, The plasmon band in
https://doi.org/10.1007/s00170-019-03438-2 noble metal nanoparticles: an introduction to theory and
applications, New J Chem, 30: 1121–1132.
18. Zeng M, Kuang W, Khan I, et al., 2020, Colloidal
nanosurfactants for 3D conformal printing of 2D van der https://doi.org/10.1039/b604038c
waals materials. Adv Mater, 32: 2003081.
30. Kelly KL, Coronado E, Zhao LL, et al., 2003, The optical
https://doi.org/10.1002/adma.202003081 properties of metal nanoparticles: The influence of size, shape,
and dielectric environment. J Phys Chem B, 107: 668–677.
19. Aleeva Y, Pignataro B, 2014, Recent advances in upscalable
wet methods and ink formulations for printed electronics. https://doi.org/10.1021/jp026731y
J Mater Chem C, 2: 6436–6453.
31. Zhang JZ, Noguez C, 2008, Plasmonic optical properties and
https://doi.org/10.1039/c4tc00618f applications of metal nanostructures. Plasmonics, 3: 127–150.
20. Hoeng F, Denneulin A, Bras J, 2016, Use of nanocellulose in https://doi.org/10.1007/s11468-008-9066-y

Volume 1 Issue 2 (2022) 14 http://doi.org/10.18063/msam.v1i2.10