Page 40 - MSAM-1-2
P. 40

Materials Science in Additive Manufacturing                     Intense pulsed light sintering of conductive film




            A             A                                    B B





























                              Figure 6. Model residuals versus test orders for (A) sheet resistance and (B) surface roughness.

            A                                                 B






























                              Figure 7. Predicted line values actual values for (A) sheet resistance and (B) surface roughness.

            In addition, the minimum value and maximum value set   The desirability function approach can optimize the
            for the sheet resistance and the surface roughness indicator   conflicting responses by merging the multi-objective vector
            are [3×10 , 1.07]  Ω/sq and [0.034, 0.922], respectively. In   into  a single  objective.  As the  attained  optimal solution
                   -2
            this case, the optimal number of layer and sintering distance   is very sensitive to the user specified weights used in the
            determined from the desirability function are 2 and 42.5 cm,   optimization process, there is a need to determine a set
            respectively, and the overall desirability is 0.878 (Figure 10).  of Pareto-optimal points as alternate solutions in place of



            Volume 1 Issue 2 (2022)                         9                      http://doi.org/10.18063/msam.v1i2.10
   35   36   37   38   39   40   41   42   43   44   45