Page 111 - MSAM-2-3

Materials Science in Additive Manufacturing Validation of a novel ML model for AM-PSP

slip strength of titanium alloys: α Nodule size dependence of support vector machines. Comput Mater Sci, 32: 223–239.
the critical resolved shear stress. Metall Mater Trans A Phys https://doi.org/10.1016/j.commatsci.2004.07.004
Metall Mater Sci, 49: 4394–4397.
93. Sun J, Guo YB, 2009, Material flow stress and failure in
https://doi.org/10.1007/s11661-018-4678-0 multiscale machining titanium alloy Ti-6Al-4V. Int J Adv

90. Gong G, 1986, Cross-validation, the jack knife, and the Manuf Technol, 41: 651–659.
bootstrap: Excess error estimation in forward logistic https://doi.org/10.1007/s00170-008-1521-6
regression. J Am Stat Assoc, 81: 108–113.
94. Ginting A, Nouari M, 2009, Surface integrity of dry
https://doi.org/10.1080/01621459.1986.10478245 machined titanium alloys. Int J Mach Tools Manuf, 49: 325–
332.
91. Chen T, Guestrin C, 2016, XGBoost: A Scalable Tree
Boosting System. KDD ’16, August 13-17, San Francisco, https://doi.org/10.1016/j.ijmachtools.2008.10.011
CA, USA, 2016. 95. Pramanik A, 2014, Problems and solutions in machining of
92. Sundararaghavan V, Zabaras N, 2005, Classification and titanium alloys. Int J Adv Manuf Technol, 70: 919–928.
reconstruction of three-dimensional microstructures using https://doi.org/10.1007/s00170-013-5326-x

Volume 2 Issue 3 (2023) 19 https://doi.org/10.36922/msam.0999