Page 113 - MSAM-3-2

Materials Science in Additive Manufacturing NiTi lattice: Performance optimization

50. International Organization for Standardization. Metallic Behav Biomed Mater. 2017;70:53-59.
Materials--Fatigue Testing--Axial Force-controlled Method. doi: 10.1016/j.jmbbm.2017.01.016
Geneva: International Organization for Standardization; 2006.
53. Zhu ML, Jin L, Xuan FZ. Fatigue life and mechanistic modeling
51. Li SJ, Murr LE, Cheng XY, et al. Compression fatigue
behavior of Ti-6Al-4V mesh arrays fabricated by electron of interior micro-defect induced cracking in high cycle and
beam melting. Acta Mater. 2012;60(3):793-802. very high cycle regimes. Acta Mater. 2018;157:259-275.
doi: 10.1016/j.actamat.2018.07.036
doi: 10.1016/j.actamat.2011.10.051
54. Swain MV, Lawn BR, Burns SJ. Cleavage step deformation in
52. Speirs M, Van Hooreweder B, Van Humbeeck J, Kruth JP.
Fatigue behaviour of NiTi shape memory alloy scaffolds brittle solids. J Mater Sci. 1974;9(2):175-183.
produced by SLM, a unit cell design comparison. J Mech doi: 10.1007/BF00550939

Volume 3 Issue 2 (2024) 16 doi: 10.36922/msam.3380