Page 97 - DP-2-1

Design+ Analysis of 3D-printed anisotropic cells

19. Sood A, Ohdar R, Mahapatra S. Parametric appraisal of fused Struct. 2017;175:46-57.
deposition modelling process using the grey Taguchi method. doi: 10.1016/j.compstruct.2017.05.001
Proc Inst Mech Eng B J Eng Manuf. 2010;224(1):135-145.
23. Ziemian C, Sharma M, Ziemian S. Anisotropic mechanical
doi: 10.1243/09544054JEM1565 properties of ABS parts fabricated by fused deposition modelling.
20. Sood AK, Ohdar R, Mahapatra S. Parametric appraisal In: Mechanical Engineering. London: IntechOpen; 2012.
of mechanical property of fused deposition modelling 24. Chacón JM, Caminero MA, García-Plaza E, Núñez PJ.
processed parts. Mater Des. 2010;31(1):287-295.
Additive manufacturing of PLA structures using fused
doi: 10.1016/j.matdes.2009.06.016 deposition modelling: Effect of process parameters on
21. Too,MH, Leong KF, Chua CK, et al. Investigation of mechanical properties and their optimal selection. Mater
3D nonrandom porous structures by fused deposition Des. 2017;124:143-157.
modelling. Int J Adv Manuf Technol. 2002;19(3):217-223. doi: 10.1016/j.matdes.2017.03.065
doi: 10.1007/s001700200016 25. Edgar. Stock Chart - Stratasys. Stratasys Investors. 2011.
22. Li T, Wang L. Bending behavior of sandwich composite Available from: https://www.stratasys.com [Last accessed on
structures with tunable 3D-printed core materials. Compos 2025 Jan 10].

Volume 2 Issue 1 (2025) 14 doi: 10.36922/dp.3779