Page 92 - ESAM-1-2

Engineering Science in
Additive Manufacturing Porous structure performance improvement

of SLM process parameters on density, hardness, tensile doi: 10.1016/j.mechmat.2022.104241
strength and surface quality of Ti-6Al-4V. Addit Manuf. 29. Zhao X, Li Z, Zou Y, Zhao X. Compressive characteristics
2019;25:176-186.
and energy absorption capacity of automobile energy-
doi: 10.1016/j.addma.2018.09.002 absorbing box with filled porous TPMS structures. Appl Sci.
2024;14(9):3790.
20. Shifeng W, Shuai L, Qingsong W, Yan C, Sheng Z, Yusheng S.
Effect of molten pool boundaries on the mechanical doi: 10.3390/app14093790
properties of selective laser melting parts. J Mater Process 30. Li Z, Zhao R, Chen X, Jiao Y, Chen Z. Design
Technol. 2014;214(11):2660-2667. approach for tuning the hybrid region of 3D-printed
doi: 10.1016/j.jmatprotec.2014.06.002 heterogeneous structures: Modulating mechanics and
energy absorption capacity. ACS Appl Mater Interfaces.
21. Ansari MJ, Nguyen DS, Park HS. Investigation of SLM 2023;15(6):7686-7699.
process in terms of temperature distribution and melting
pool size: Modeling and experimental approaches. Materials. doi: 10.1021/acsami.2c17753
2019;12(8):1272. 31. Dong JH, Wang YJ, Jin FN, Fan HL. Crushing behaviors

doi: 10.3390/ma12081272 of buckling-induced metallic meta-lattice structures. Def
Technol. 2022;18(8):1301-1310.
22. Seetoh IP, Liu X, Markandan K, Zhen L, Lai CQ. Strength
and energy absorption characteristics of Ti6Al4V doi: 10.1016/j.dt.2021.07.014
auxetic 3D anti-tetrachiral metamaterials. Mech Mater. 32. Obadimu SO, Kourousis KI. Compressive behaviour
2021;156:103811. of additively manufactured lattice structures: A review.
doi: 10.1016/j.mechmat.2021.103811 Aerospace. 2021;8(8):207.
23. Choy SY, Sun CN, Sin WJ, et al. Superior energy absorption of doi: 10.3390/aerospace8080207
continuously graded microlattices by electron beam additive 33. Li Y, Wang XS, Meng XK. Buckling behavior of metal film/
manufacturing. Virtual Phys Prototyp. 2021;16(1):1-15. substrate structure under pure bending. Appl Phys Lett.
doi: 10.1080/17452759.2020.1868656 2008;92(13):131902.
24. Mahamood RM, Akinlabi ET, Owolabi MG, doi: 10.1063/1.2897035
Abdulrahman KO. Advanced manufacture of compositionally 34. Zhao S, Li SJ, Hou WT, Hao YL, Yang R, Misr RDK. The
graded composite materials: An overview. In: Hierarchical influence of cell morphology on the compressive fatigue
Composite Materials: Materials, Manufacturing, Engineering. behavior of Ti-6Al-4V meshes fabricated by electron beam
Berlin, Boston: De Gruyter; 2019. p. 41-54. melting. J Mech Behav Biomed Mater. 2016;59:251-264.
doi: 10.1515/9783110545104-003 doi: 10.1016/j.jmbbm.2016.01.034
25. Evans AG, He MY, Deshpande VS, Hutchinson JW, 35. Li D, Liao W, Dai N, Xie YM. Comparison of mechanical
Jacobsen AJ, Carter WB. Concepts for enhanced energy properties and energy absorption of sheet-based and strut-
absorption using hollow micro-lattices. Int J Impact Eng. based gyroid cellular structures with graded densities.
2010;37:947-959. Materials. 2019;12(13):2183.
doi: 10.1016/j.ijimpeng.2010.03.007 doi: 10.3390/ma12132183
26. Liu F, Zhang DZ, Zhang P, Zhao M, Jafar S. Mechanical 36. Yang E, Leary M, Lozanovski B, et al. Effect of geometry on
properties of optimized diamond lattice structure for bone the mechanical properties of Ti-6Al-4V Gyroid structures
scaffolds fabricated via selective laser melting. Materials. fabricated via SLM: A numerical study. Mater Design.
2018;11:374. 2019;184:108165.
doi: 10.3390/ma11030374 doi: 10.1016/j.matdes.2019.108165
27. Zhao M, Zhang DZ, Liu F, Li Z, Ma Z, Ren Z. Mechanical 37. Choy SY, Sun CN, Leong KF, Wei J. Compressive properties
and energy absorption characteristics of additively of Ti-6Al-4V lattice structures fabricated by selective laser
manufactured functionally graded sheet lattice structures melting: Design, orientation and density. Addit Manuf.
with minimal surfaces. Int J Mech Sci. 2020;167:105262. 2017;16:213-224.
doi: 10.1016/j.ijmecsci.2019.105262 doi: 10.1016/j.addma.2017.06.012
28. Sun Q, Sun J, Guo K, Wang L. Compressive mechanical 38. Jenkins SNM. Mechanical Properties and Structural
properties and energy absorption characteristics of SLM Evaluation of Diamond Structure Ti6Al4V Lattices
fabricated Ti6Al4V triply periodic minimal surface cellular Made by Electron Beam Melting. England: University of
structures. Mech Mater. 2022;166:104241. Sheffield; 2017.

Volume 1 Issue 2 (2025) 14 doi: 10.36922/ESAM025170009