Page 432 - IJB-10-1

International Journal of Bioprinting Mechanically biomimicking 3D bone model

Figure 5. Tunability in the mechanical properties of infill-varied structures. Compressive properties for stiffness and failure load of specimens fabricated
with variation of (A) D , (B) vol , (c) D , and (d) combination of D and D (mean ± SD and n = 5). The stiffnesses were calculated from the displacement
S
S
S
H
H
range of 1–2 mm.

Volume 10 Issue 1 (2024) 424 https://doi.org/10.36922/ijb.1067