Page 62 - IJB-6-4

Large-Scale AM for Manufacturing PPE during COVID-19
Dynamics in Wuhan, China, of Novel Coronavirus-Infected Handbook. Technologies, Design and Applications. 3D Hubs
Pneumonia. N Engl J Med, 382:1199–207. B.V, Amsterdam, Netherlands.
[4] World Health Organization, 2020, WHO Virtual Press [17] E3D Blog, E3D. Available from: https://www.e3d-online.com/
Conference on COVID-19. World Health Organization, blog/2019/02/28/supervolcano. [Last accessed on 2020 May 13].
Genevs. Available from: https://www.who.int/docs/ [18] Post BK, Chesser PC, Lind RF, et al., 2018, Using big area
default-source/coronaviruse/transcripts/who-audio- additive manufacturing to directly manufacture a boat hull
emergencies-coronavirus-press-conference-22apr2020.pdf? mould. Virtual and Physical Prototyping, 14:123–9. DOI:
sfvrsn=4f8821b6_2 [Last accessed on 2020 Jun 01]. 10.1080/17452759.2018.1532798.
[5] World Health Organisation, 2020, Coronavirus Disease [19] Kunc V, Hassen AA, Lindahl J, et al., 2017, Large Scale
2019 (COVID-19): Situation Report. Vol. 112. World Health Additively Manufactured Tooling for Composites.
Organisation, Geneva. Conference: 15 Japan International Sampe Symposium And
th
[6] Liu Y, Gayle AA, Wilder-Smith A, et al., The Reproductive Exhibition, At Tokyo, Japan.
Number of COVID-19 is Higher Compared to SARS [20] Post BK, Richardson B, Lind R, et al., 2017, Big Area Additive
Coronavirus. J Travel Med, 27:taaa021. DOI: 10.1093/jtm/ Manufacturing Application In Wind Turbine Molds. In: Solid
taaa021. Freeform Fabrication 2017: Proceedings of the 28 Annual
th
[7] Ather A, Patel B, Ruparel NB, et al., 2020, Coronavirus International Solid Free Form Fabrication Symposium. DOI:
Disease 19 (COVID-19): Implications for Clinical Dental 10.32656/sff.
Care. J Endod, 46:584–95. DOI: 10.1016/j.joen.2020.03.008. [21] Nieto DM, López VC, Molina SI, 2018, Large-format
[8] Bai Y, Yao L, Wei T, et al., 2020, Presumed Asymptomatic Polymeric Pellet-based Additive Manufacturing for the Naval
Carrier Transmission of COVID-19. JAMA, 323:1406–7. Industry. Additive Manufacturing, 23:79–85. DOI: 10.1016/j.
DOI: 10.1001/jama.2020.2565. addma.2018.07.012.
[9] World Health Organization, 2020, Rational Use of Personal [22] Murat A, 2015, Additive Manufacturing: Is it a New Era for
Protective Equipment for Coronavirus Disease 2019 Furniture Production? Journal of Mechanics Engineering
(COVID-19). World Health Organization, Geneva. and Automation, 5:338–47.
[10] World Health Organization, 2020, Modes of Transmission of [23] Reinforced Plastics, 2019, Continuous CF bike frame.
Virus Causing COVID-19: Implications for IPC Precaution Reinforced Plastics, 63:163-220. https://doi.org/10.1016/j.
Recommendations. Intensive Care Med, 46:854–87. repl. 2019.06.043.
[11] Livingston E, Desai A, Berkwits M, 2020, Sourcing Personal [24] National 3D Printing Society. Medical AM (COVID-19).
Protective Equipment during the COVID-19 Pandemic. Available from: https://www.national3dprintingsociety.
JAMA, 2020:5317. DOI: 10.1001/jama.2020.5317. co.uk/medical-am-covid-19. [Last accessd on 2020 Jun 01].
[12] Larrañeta E, Dominguez-Robles J, Lamprou DA, 2020, [25] Prusa Research. “Prusa Face Shield”. Available from: https://
Additive Manufacturing Can Assist in the Fight Against www.prusaprinters.org/prints/25857-prusa-face-shield. [Last
COVID-19 and Other Pandemics and Impact on the Global accessed on 2020 Jun 01].
Supply Chain. 3D Printing and Additive Manufacturing, [26] 3DVerkstan. “3D-Printed Protective Visor”. Available from:
2020:106. DOI: 10.1089/3dp.2020.0106. https://www.3dverkstan.se/protective-visor. [Last accessed
[13] Flanagan ST, Ballard DH, 2020, 3D Printed Face Shields: A on 2020 Jun 01].
Community Response to the COVID-19 Global Pandemic. [27] Devicharan R, Garg R, 2019, Optimization of the Print
Acad Radiol, 27:905–6. DOI: 10.1016/j.acra.2020.04.020. Quality by Controlling the Process Parameters on 3D Printing
[14] Phillips W, Dalgarno K, Medcalf N, et al., 2017, Redistributed Machine. In: 3D Printing and Additive Manufacturing
Manufacturing in Healthcare: Creating New Value through Technologies. Springer, Singapore, pp. 187–94. DOI:
Disruptive Innovation. 2017:14567. 10.1007/978-981-13-0305-0_16.
[15] Tardieu H, Daly D, Esteban-Lauzán J, et al. Case study 6: [28] Galatia M, Minetola P, Marchiandi G, et al., 2019, A
The digital transformation of manufacturing. In: Deliberately Methodology for Evaluating the Aesthetic Quality of 3D
Digital. Springer, 2020, pp. 269–80. Printed Part. Procedia CIRP, 79:95–100. DOI: 10.1016/j.
[16] Redwood B, Schöffer F, Garret B, 2017, The 3D Printing procir.2019.02.018.

58 International Journal of Bioprinting (2020)–Volume 6, Issue 4