Page 102 - IJB-7-1
P. 102

3D Printing of Ceramic Dental Prostheses
           well  as  incorporate  new  materials  and  applications  for   Manufacturing  for  Active  Electronic  Components.  Virtual
           screening.                                              Phys Prototyp, 12:31–46.
                                                                   https://doi.org/10.1080/17452759.2016.1253181
           Acknowledgment
                                                               10.  Ng WL, Chua CK, Shen YF, 2019, Print me an Organ! Why
           We would like to thank Concep3D R&D and FAE Centro      we are not there yet. Prog Polym Sci, 97:101145.
           Universitário for their support and infrastructure.      https://doi.org/10.1016/j.progpolymsci.2019.101145
           Conflicts of interest                               11.  Lee JM, Ng WL, Yeong WY, 2019, Resolution and Shape
                                                                   in  Bioprinting:  Strategizing  Towards  Complex  Tissue  and
           No conflicts of interest were reported by the authors.  Organ Printing. Appl Phys Rev, 6:011307.
           Author contributions                                    https://doi.org/10.1063/1.5053909
                                                               12.  Prinz  FB,  1997,  Rapid  Prototyping  in  Europe  and  Japan.
           All the stages of this study were performed only by the   Center Adv Technol, 1997:102.
           author.
                                                               13.  Vandenbroucke B, Kruth JP, 2007, Selective Laser Melting of
           References                                              Biocompatible Metals for Rapid Manufacturing of Medical
                                                                   Parts. Rapid Prototyp J, 13:196–203.
           1.   Cunico  MW,  de  Carvalho  J,  2016,  Development  of  Novel      https://doi.org/10.1108/13552540710776142
               Additive Manufacturing Technology: An Investigation of a   14.  Wong J, 2010, Biocompatible Tantalum Fiber Scaffolding for
               Selective Composite Formation Process. Rapid Prototyp J,   Bone and Soft Tissue Prosthesis, Google Patents.
               22:51–66.                                       15.  Mueller  B,  2012,  Additive  Manufacturing  Technologies:
               https://doi.org/10.1108/rpj-04-2014-0049            Rapid Prototyping to Direct Digital Manufacturing. Assembly
           2.   Sulaiman TA, 2020, Materials in Digital Dentistry a Review.   Autom, 32:3332.
               J Esthet Restor Dent, 32:171–81.                    https://doi.org/10.1108/aa.2012.03332baa.010
           3.   Li  RW,  Chow  TW,  Matinlinna  JP,  2014,  Ceramic  Dental   16.  Anusavice KJ, 2013, Phillips Materiais Dentários. Elsevier,
               Biomaterials and CAD/CAM Technology: State of the Art. J   Brasil.
               Prosthodont Res, 58:208–16.                     17.  Denry IL, 1996, Recent Advances in Ceramics for Dentistry.
               https://doi.org/10.1016/j.jpor.2014.07.003          Crit Rev Oral Biol Med, 7:134–43.
           4.   Karthick  A,  Malarvizhi  D,  Tamilselvi  R,  et  al.,  2019,   18.  Lin L, Fang Y, Liao Y, et al., 2019, 3D Printing and Digital
               Ceramics in dentistry? A review. Indian J Public Health Res   Processing Techniques in Dentistry: A Review of Literature.
               Dev, 10:6065.                                       Adv Eng Mater, 21:1801013.
           5.   Gali S, Sirsi S, 2015, 3D Printing: The Future Technology in      https://doi.org/10.1002/adem.201801013
               Prosthodontics. J Dent Orofac Res, 11:37–40.    19.  Torabi K, Farjood E, Hamedani S, 2015, Rapid Prototyping
           6.   Uriondo A,  Esperon-Miguez  M,  Perinpanayagam  S,  2015,   Technologies  and their  Applications in Prosthodontics, a
               The  Present  and  Future  of Additive  Manufacturing  in  the   Review of Literature. J Dent, 16:1.
               Aerospace Sector: A Review of Important Aspects. Proc Inst   20.  Denry I, Kelly J, 2014, Emerging Ceramic-based Materials
               Mech Eng G, 229:2132–47.                            for Dentistry. J Dent Res, 93:1235–42.
               https://doi.org/10.1177/0954410014568797            https://doi.org/10.1177/0022034514553627
           7.   Najmon  JC,  Raeisi  S,  Tovar A,  2019,  Review  of Additive   21.  Ishida Y, Miyasaka T, 2016, Dimensional Accuracy of Dental
               Manufacturing  Technologies  and  Applications  in the   Casting  Patterns  Created  by 3D Printers.  Dent Mater  J,
               Aerospace  Industry.  In:  Additive  Manufacturing  for  the   35:250–6.
               Aerospace Industry. Elsevier, Amsterdam, Netherlands, pp.      https://doi.org/10.4012/dmj.2015-278
               7–31.                                           22.  Shujaat  S,  Shaheen  E,  Novillo  F,  et  al.,  2020,  Accuracy
               https://doi.org/10.1016/b978-0-12-814062-8.00002-9  of  Cone  Beam  Computed  Tomography  Derived  Casts:  A
           8.   Espera AH, Dizon JR, Chen Q, et al., 2019, 3D-printing and   Comparative Study. J Prosthet Dent, 2020:21.
               Advanced Manufacturing for Electronics. Prog Addit Manuf,      https://doi.org/10.1016/j.prosdent.2019.11.021
               4:245–67.                                       23.  Dikova T, Dzhendov DA, Ivanov D, et al., 2018, Dimensional
               https://doi.org/10.1007/s40964-019-00077-7          Accuracy and Surface Roughness of Polymeric  Dental
           9.   Saengchairat N, Tran T, Chua CK, 2017, A Review: Additive   Bridges Produced by Different 3D Printing Processes. Arch

           98                          International Journal of Bioprinting (2021)–Volume 7, Issue 1
   97   98   99   100   101   102   103   104   105   106   107