Page 44 - IJB-7-1

3D Printing Technologies in Metallic Implants
Technology for CT Phantom Coronary Arteries with High https://doi.org/10.1021/acs.iecr.9b02679.
Geometrical Accuracy for Biomedical Imaging Applications. 18. Shirazi SF, Gharehkhani S, Mehrali M, et al., 2015, A
Bioprinting, 18:e00074. Review on Powder-based Additive Manufacturing for
https://doi.org/10.1016/j.bprint.2020.e00074. Tissue Engineering: Selective Laser Sintering and Inkjet 3D
8. Jardini AL, Larosa MA, Filho RM, et al., 2014, Cranial Printing. Sci Technol Adv Mater, 16:033502.
Reconstruction: 3D Biomodel and Custom-built Implant https://doi.org/10.1088/1468-6996/16/3/033502.
Created Using Additive Manufacturing. J Craniomaxillofac 19. Sun S, Brandt M, Easton M, 2017, 2-Powder Bed Fusion
Surg, 42:1877–84. Processes: An Overview. In: Brandt MB, editor. Woodhead
https://doi.org/10.1016/j.jcms.2014.07.006. Publishing Series in Electronic and Optical Materials.
9. Mobbs RJ, Coughlan M, Thompson R, et al., 2017, The Woodhead Publishing, Sawston, United Kingdom, pp. 55–77.
Utility of 3D Printing for Surgical Planning and Patient- https://doi.org/https://doi.org/10.1016/B978-0-08-100433-
specific Implant Design for Complex Spinal Pathologies: 3.00002-6.
Case Report. J Neurosurg Spine, 26:513–8. 20. Sing SL, Huang S, Yeong WY, 2020, Effect of Solution Heat
https://doi.org/10.3171/2016.9.SPINE16371. Treatment on Microstructure and Mechanical Properties of
10. Kodama H, 1981, A Scheme for Three-Dimensional Display Laser Powder Bed Fusion Produced Cobalt-28chromium-
by Automatic Fabrication of Three-Dimensional Model. 6molybdenum. Mater Sci Eng A, 769:138511.
IEICE Trans Electron (Japanese Ed), 64:237–41. https://doi.org/10.1016/j.msea.2019.138511.
11. Hull CW, Spence ST, Albert DJ, et al., 1988, Methods and 21. Galati M, Iuliano L, 2018, A Literature Review of Powder-
Apparatus for Production of Three-dimensional Objects by based Electron Beam Melting Focusing on Numerical
Stereolithography, Patents No. 5059359. Simulations. Addit Manuf, 19:1–20.
12. Noor N, Shapira A, Edri R, et al., 2019, 3D Printing of https://doi.org/https://doi.org/10.1016/j.addma.2017.11.001.
Personalized Thick and Perfusable Cardiac Patches and 22. Yu W, Sing SL, Chua CK, et al., 2019, Influence of Re-
Hearts. Adv Sci, 2019:1900344. melting on Surface Roughness and Porosity of AlSi10Mg
https://doi.org/10.1002/advs.201900344. Parts Fabricated by Selective Laser Melting. J Alloys Compd,
13. Ahmad AN, Gopinath P, Vinogradov A, 2019, 3D Printing 792:574–81.
in Medicine. In: 3D Printing Technology, Nanomedicine. https://doi.org/10.1016/j.jallcom.2019.04.017.
Elsevier, Amsterdam, Netherlands, pp. 1–22. 23. Li X, Tan YH, Willy HJ, et al., 2019, Heterogeneously
https://doi.org/10.1016/B978-0-12-815890-6.00001-3. Tempered Martensitic High Strength Steel by Selective Laser
14. Gorsse S, Hutchinson C, Gouné M, et al., 2017, Additive Melting and its Micro-lattice: Processing, Microstructure,
Manufacturing of Metals: A Brief Review of the Characteristic Superior Performance and Mechanisms. Mater Des,
Microstructures and Properties of Steels, Ti-6Al-4V and 178:107881.
High-entropy Alloys. Sci Technol Adv Mater, 18:584–610. https://doi.org/10.1016/j.matdes.2019.107881.
https://doi.org/10.1080/14686996.2017.1361305. 24. Kuo CN, Chua CK, Peng PC, et al., 2020, Microstructure
15. Boularaoui S, Al Hussein G, Khan KA, et al., 2020, An Evolution and Mechanical Property Response via 3D Printing
Overview of Extrusion-based Bioprinting with a Focus Parameter Development of Al-Sc alloy. Virtual Phys Prototyp,
on Induced Shear Stress and its Effect on Cell Viability. 15:120–9.
Bioprinting, 20:e00093. https://doi.org/10.1080/17452759.2019.1698967.
https://doi.org/10.1016/j.bprint.2020.e00093. 25. Yap CY, Chua CK, Dong ZL, et al., 2015, Review of Selective
16. Gibson I, Rosen D, Stucker B, 2015, Vat Photopolymerization Laser Melting: Materials and Applications. Appl Phys Rev,
Processes. In: Addition Manufacturing Technologies. 2:041101.
Springer, New York, pp. 63–106. https://doi.org/10.1063/1.4935926.
https://doi.org/10.1007/978-1-4939-2113-3_4. 26. Sing SL, Wiria FE, Yeong WY, 2018, Selective Laser Melting
17. Appuhamillage GA, Chartrain N, Meenakshisundaram V, of Titanium Alloy with 50 wt% Tantalum: Effect of Laser
et al., 2019, 110 Anniversary : Vat Photopolymerization- Process Parameters on Part Quality. Int J Refract Met Hard
th
Based Additive Manufacturing: Current Trends and Mater, 77:120–7.
Future Directions in Materials Design. Ind Eng Chem Res, https://doi.org/10.1016/j.ijrmhm.2018.08.006.
58:15109–18. 27. Wang P, Nai ML, Tan X, et al., 2016, Recent Progress

40 International Journal of Bioprinting (2021)–Volume 7, Issue 7