Page 222 - IJB-8-1

Nano-Hydroxyapatite Bone Scaffolds with Different Porous Structures Processed by Digital Light Processing 3D Printing
7. McDermott AM, Herberg S, Mason DE, et al., 2019, in Orthopedics: Topographical, Mechanical, and Biological
Recapitulating Bone Development Through Engineered Characterization. J Biomed Mater Res B Appl Biomater,
Mesenchymal Condensations and Mechanical Cues for 107:2343–53.
Tissue Regeneration. Sci Transl Med, 11:eaav7756. https://doi.org/10.1002/jbm.b.34328
https://doi.org/10.1126/scitranslmed.aav7756 18. Bigham A, Foroughi F, Ghomi ER, et al., 2020, The Journey of
8. Zhu Y, Zhang K, Zhao R, et al., 2017, Bone Regeneration with Multifunctional Bone Scaffolds Fabricated from Traditional
Micro/Nano Hybrid-Structured Biphasic Calcium Phosphate Toward Modern Techniques. Biodes Manuf, 3:1–26.
Bioceramics at Segmental Bone Defect and the Induced https://doi.org/10.1007/s42242-020-00094-4
Immunoregulation of MSCs. Biomaterials, 147:133–44. 19. Sun J, Binner J, Bai J, 2019, Effect of Surface Treatment on
https://doi.org/10.1016/j.biomaterials.2017.09.018 the Dispersion of Nano Zirconia Particles in Non-Aqueous
9. Klar RM, 2018, The Induction of Bone Formation: The Suspensions for Stereolithography. J Eur Ceram Soc,
Translation Enigma. Front Bioeng Biotechnol, 6:74. 39:1660–7.
https://doi.org/10.3389/fbioe.2018.00074 https://doi.org/10.1016/j.jeurceramsoc.2018.10.024
10. Roddy E, DeBaun MR, Daoud-Gray A, et al., 2018, 20. Ding G, He R, Zhang K, et al., 2020, Dispersion and Stability
Treatment of Critical-Sized Bone Defects: Clinical and Tissue of SiC Ceramic Slurry for Stereolithography. Ceram Int,
Engineering Perspectives. Eur J Orthop Surg Traumatol, 46:4720–9.
28:351–62. https://doi.org/10.1016/j.ceramint.2019.10.203
https://doi.org/10.1007/s00590-017-2063-0 21. King BW Jr., 1940, Effect of Particle Size and Index of
11. Khairallah M, Almeshaly H, 2016, Present Strategies for Refraction on Reflectance. J Am Ceram Soc, 23:221–5.
Critical Bone Defects Regeneration. Oral Health Case Rep, 2:3. https://doi.org/10.1111/j.1151-2916.1940.tb14258.x
https://doi.org/10.4172/2471-8726.1000127 22. Ju Y, Ha J, Song Y, et al., 2020, Optimizing the Printability
12. Roseti L, Parisi V, Petretta M, et al., 2017, Scaffolds for Bone and Dispersibility of Functionalized Zirconium Oxide/
Tissue Engineering: State of the Art and New Perspectives. Acrylate Composites with Various Nano-to Micro-Particle
Mater Sci Eng C, 78:1246–62. Ratios. Ceram Int, 46:26903–10.
https://doi.org/10.1016/j.msec.2017.05.017 https://doi.org/10.1016/j.ceramint.2020.07.168
13. Blanquer SB, Werner M, Hannula M, et al., 2017, Surface 23. De Camargo IL, Morais MM, Fortulan CA, et al., 2021, A
Curvature in Triply-Periodic Minimal Surface Architectures Review on the Rheological Behavior and Formulations of
as a Distinct Design Parameter in Preparing Advanced Tissue Ceramic Suspensions for Vat Photopolymerization. Ceram
Engineering Scaffolds. Biofabrication, 9:025001. Int, 47:11906–21.
https://doi.org/10.1088/1758-5090/aa6553 https://doi.org/10.1016/j.ceramint.2021.01.031
14. Lu F, Wu R, Shen M, et al., 2021, Rational Design of 24. Sun J, Binner J, Bai J, 2020, 3D Printing of Zirconia Via
Bioceramic Scaffolds with Tuning Pore Geometry by Digital Light Processing: Optimization of Slurry and
Stereolithography: Microstructure Evaluation and Mechanical Debinding Process. J Eur Ceram Soc, 40:5837–44.
Evolution. J Eur Ceram Soc, 41:1672–82. https://doi.org/10.1016/j.jeurceramsoc.2020.05.079
https://doi.org/10.1016/j.jeurceramsoc.2020.10.002 25. Zheng T, Wang W, Sun J, et al., 2020, Development and
15. Yao Y, Qin W, Xing B, et al., 2021, High Performance Evaluation of Al2O3-ZrO2 Composite Processed by Digital
Hydroxyapatite Ceramics and a Triply Periodic Minimum Light 3D Printing. Ceram Int, 46:8682–8.
Surface Structure Fabricated by Digital Light Processing 3D https://doi.org/10.1016/j.ceramint.2019.12.102
Printing. J Adv Ceram, 10:39–48. 26. Yu S, Sun J, Bai J, 2019, Investigation of Functionally Graded
https://doi.org/10.1007/s40145-020-0415-4 TPMS Structures Fabricated by Additive Manufacturing.
16. Huo P, Zhao Z, Bai P, et al., 2021, Deformation Evolution Mater Des, 182:108021.
and Fracture Mechanism of Porous TC4 Alloy Scaffolds https://doi.org/10.1016/j.matdes.2019.108021
Fabricated Using Selective Laser Melting under Uniaxial 27. Vijayavenkataraman S, Zhang L, Zhang S, et al., 2018,
Compression. J Alloys Compd, 861:158529. Triply Periodic Minimal Surfaces Sheet Scaffolds for Tissue
https://doi.org/10.1016/j.jallcom.2020.158529 Engineering Applications: An Optimization Approach
17. Caravaggi P, Liverani E, Leardini A, et al., 2019, CoCr Toward Biomimetic Scaffold Design. ACS Appl Bio Mater,
Porous Scaffolds Manufactured Via Selective Laser Melting 1:259–69.

208 International Journal of Bioprinting (2022)–Volume 8, Issue 1