Page 194 - IJB-9-6

International Journal of Bioprinting 3D-printed assembly anatomical patella fracture bone plate

cannulated screws in transverse patella fractures. Knee Surg cannulated screws, and ring pins. J Orthop Surg, 27(3):
Sports Traumatol Arthrosc, 21(2): 311–317. 2309499019882140.
6. D’Ambrosio M, Tang A, Menken L, et al., 2022, Adjunct 16. Sharkey NA, Donahue SW, Smith TS, et al., 1997, Patellar
neutralization plating in patella fracture fixation: A technical strain and patellofemoral contact after bone–patellar
trick, OTA Int, 5(4): e217. tendon–bone harvest for anterior cruciate ligament
reconstruction. Arch Phys Med Rehabil, 78(3): 256–263.
7. Stoffel K, Zderic I, Pastor T, et al., 2023, Anterior variable-
angle locked plating versus tension band wiring of simple and 17. Chang CW, Chen CH, Li CT, et al., 2020, Role of an
complex patella fractures - a biomechanical investigation. additional third screw in the fixation of transverse patellar
BMC Musculoskelet Disord, 24(1): 279. fracture with two parallel cannulated screw and anterior
wire. BMC Musculoskelet Disord, 21(1): 752.
8. Kumar G, Mereddy PK, Hakkalamani S, et al., 2010, Implant
removal following surgical stabilization of patella fracture. 18. Chang CW, Chen YN, Li CT, et al., 2018, Role of screw
Orthopedics, 33(5): 301–304. proximity in the fixation of transverse patellar fractures with
screws and a wire. J Orthop Surg, 26(3): 2309499018789705.
9. Dargel J, Gick S, Mader K, et al., 2010, Biomechanical
comparison of tension band- and interfragmentary screw 19. Chen CH, Chen YN, Li CT, et al., 2019, Roles of the screw
fixation with a new implant in transverse patella fractures. types, proximity and anterior band wiring in the surgical
Injury, 41(2): 156–160. fixation of transverse patellar fractures: A finite element
investigation. BMC Musculoskelet Disord, 20(1): 99.
10. Wagner FC, Neumann MV, Wolf S, et al., 2020, Biomechanical
comparison of a 3.5 mm anterior locking plate to cannulated 20. Ling M, Zhan S, Jiang D, et al., 2019, Where should
screws with anterior tension band wiring in comminuted Kirschner wires be placed when fixing patella fracture with
patellar fractures. Injury, 51(6): 1281–1287. modified tension-band wiring? A finite element analysis. J
Orthop Surg Res, 14: 14.
11. Meda PVK, Machani B, Sinopidis C, et al., 2006, Clavicular
hook plate for lateral end fractures: A prospective study. 21. Liu HC, Zeng YH, Lin CL, 2021, Mechanical comparison
Injury, 37(3): 277–283. of a novel hybrid and commercial dorsal double plating for
distal radius fracture: In vitro fatigue four-point bending
12. Hung LK, Su KC, Lu WH, et al., 2017, Biomechanical and biomechanical testing. Materials (Basel), 14(20): 6189.
analysis of clavicle hook plate implantation with different
hook angles in the acromioclavicular joint, Int Orthop, 22. Lai PL, Huang SF, Wang HW, et al., 2023, Design an
41(8): 1663–1669. anatomical contour titanium 3D printed oblique lumbar
interbody fusion cage with porous structure and embedded
13. Chen CH, Chang WJ, Chen YS, et al., 2022, Development of fixation screws for patients with osteoporosis. Int J Bioprint
a novel hybrid suture anchor for osteoporosis by integrating 9(5): 445–458.
titanium 3D printing and traditional machining. Int J
Bioprint, 8(4): 608. 23. Bini RR, 2017, Patellofemoral and tibiofemoral forces
during knee extension: simulations to strength training and
14. Standard Specification and Test Method for Metallic Bone rehabilitation exercises. Fisioter Mov, 30(Suppl 1): S267–5.
Plates, ASME F382-17
24. Morgan EF, Unnikrisnan GU, Hussein AI, 2018, Bone
15. Lee KH, Lee Y, Lee YH, et al., 2019, Biomechanical mechanical properties in healthy and diseased states. Annu
comparison of three tension band wiring techniques Rev Biomed Eng, 20: 119–143.
for transverse fracture of patella: Kirschner wires,

Volume 9 Issue 6 (2023) 186 https://doi.org/10.36922/ijb.0117