Page 204 - IJB-9-6

International Journal of Bioprinting Attractiveness of 4D printing in medical field

Investigation: Angelica A. Martinez-De-Anda, Pedro F. https://doi.org/10.18063/ijb.v7i1.331
Castillo-Valdez 8. Rodriguez-Salvador M, Castillo-Valdez P, 2021, Integrating
Methodology: Angelica A. Martinez-De-Anda, Marisela science and technology metrics into a competitive technology
Rodriguez-Salvador, Pedro F. Castillo-Valdez intelligence methodology. J Intell Stud Bus, 11(1): 69–77.
Writing – original draft: Angelica A. Martinez-De-Anda https://doi.org/10.37380/jisib.v1i1.696
Writing – review & editing: Marisela Rodriguez-Salvador,
Pedro F. Castillo-Valdez 9. Sahafnejad-Mohammadi I, Karamimoghadam M,
Zolfagharian A, et al., 2022, 4D printing technology in
Ethics approval and consent to participate medical engineering: a narrative review. J Brazilian Soc Mech
Sci Eng, 44(6): 233.
Not applicable. https://doi.org/10.1007/s40430-022-03514-x

Consent for publication 10. Agarwal T, Hann SY, Chiesa I, et al., 2021, 4D printing in
biomedical applications: Emerging trends and technologies.
Not applicable. J Mater Chem B, 9(37): 7608–7632.
https://doi.org/10.1039/D1TB01335A
Availability of data
11. Joharji L, Mishra R, Alam F, et al., 2022, 4D printing: A
Data available on request from the authors detailed review of materials, techniques, and applications.
Microelectron Eng, 265: 111874.
Declaration Statement https://doi.org/10.1016/j.mee.2022.111874
The current paper is a portion of a Master dissertation 12. Chu H, Yang W, Sun L, et al., 2020, 4D printing: A review on
from Tecnologico de Monterrey presented in June 2022. recent progresses. Micromachines, 11(9): 796.

References https://doi.org/10.3390/mi11090796
13. Alshahrani HA, 2021, Review of 4D printing materials
1. Javaid M, Haleem A, Singh RP, et al., 2022, 3D printing and reinforced composites: Behaviors, applications, and
applications for healthcare research and development. Glob challenges. J Sci: Adv Mater Devices, 6(2): 167–185.
Health J, 6(4): 217–226. https://doi.org/10.1016/j.jsamd.2021.03.006
https://doi.org/10.1016/j.glohj.2022.11.001 14. Bajpai A, Baigent A, Raghav S, et al., 2020, 4D printing:
2. Dodziuk H, 2016, Applications of 3D printing in healthcare. Materials, technologies, and future applications in the
Polish J Thorac Cardiovasc Surg, 13(3): 283–293. biomedical field. Sustainability, 12(24): 10628.
https://doi.org/10.5114/kitp.2016.62625 https://doi.org/10.3390/su122410628
3. Gazzaniga A, Foppoli A, Cerea M, et al., 2023, Towards 4D 15. Maiti T, Hann SY, Chiesa I, et al., 2021, 4D printing in
printing in pharmaceutics. Int J Pharmaceut X, 5: 2590–1567. biomedical applications: Emerging trends and technologies.
J Mater Chem B, 9(37): 7608–7632.
https://doi.org/10.1016/j.ijpx.2023.100171
https://doi.org/10.1039/D1TB01335A
4. Pingale P, Dawre S, Dhapte-Pawar V, et al., 2023, Advances
in 4D printing: From stimulation to simulation. Drug Deliv 16. Ashammakhi N, Ahadian S, Zengjie F, et al., 2018, Advances
Transl Res, 13(1): 164–188. and future perspectives in 4D bioprinting. Biotechnol J,
13(12): 1800148.
https://doi.org/10.1007/s13346-022-01200-y
https://doi.org/10.1002/biot.201800148
5. Momeni F, Liu X, Ni J, 2017, A review of 4D printing. Mater
Des, 122: 42–79. 17. Zhang X, Yang Y, Yang Z, et al., 2023, Four-dimensional
printing and shape memory materials in bone tissue
https://doi.org/10.1016/j.matdes.2017.02.068
engineering. Int J Mol Sci, 24(1): 814.
6. Ghosh S, Chaudhuri S, Roy P, et al., 2022, 4D printing
in biomedical engineering: A state-of-the-art review of https://doi.org/10.3390/ijms24010814
technologies, biomaterials, and application. Regen Eng 18. Subeshan B, Baddam Y, Asmatulu E, 2021, Current progress
Transl Med, 1–27. of 4D-printing technology. Prog Addit Manuf, 6: 495–516.
https://doi.org/10.1007/s40883-022-00288-5 https://doi.org/10.1007/s40964-021-00182-6
7. Rodriguez-Salvador M, Perez-Benitez BE, Padilla-Aguirre 19. Rastogi P, Kandasubramanian B, 2019, Breakthrough in
KM, 2021, Discovering the latest scientific pathways on tissue the printing tactics for stimuli-responsive materials: 4D
spheroids: Opportunities to innovate. Int J Bioprint, 7(1): 331. printing. Chem Eng J, 366: 264–304.

Volume 9 Issue 6 (2023) 196 https://doi.org/10.36922/ijb.1112