Page 59 - MSAM-1-1

Materials Science in Additive Manufacturing From 3D printed molds to bioprinted scaffolds

organotypic cultures. Nano Lett, 15: 6919–6925. 28. Song X, Pan Y, Chen Y, 2015, Development of a low-cost
parallel kinematic machine for multidirectional additive
https://doi.org/10.1021/acs.nanolett.5b02859
manufacturing. J Manuf Sci Eng, 137: 021005.
20. Advincula RC, Dizon JR, Caldona EB, et al., 2021, On the
progress of 3D-printed hydrogels for tissue engineering. https://doi.org/10.1115/1.4028897
MRS Commun, 11: 539–553. 29. Alrashoudi AA, Albalawi HI, Aldoukhi AH, et al., 2021,
Fabrication of a lateral flow assay for rapid in-field detection
https://doi.org/10.1557/s43579-021-00069-1
of COVID-19 antibodies using additive manufacturing
21. Spicer CD, 2020, Hydrogel scaffolds for tissue engineering: printing technologies. Int J Bioprint, 7: 399.
The importance of polymer choice. Polym Chem, 11: 184–219.
https://doi.org/10.18063/ijb.v7i4.399
22. Naahidi S, Jafari M, Logan M, et al., 2017, Biocompatibility of
hydrogel-based scaffolds for tissue engineering applications. 30. Khan Z, Kahin K, Rauf S, et al., 2018, Optimization of a 3D
bioprinting process using ultrashort peptide bioinks. Int J
Biotechnol Adv, 35: 530-544.
Bioprint, 5: 173.
https://doi.org/10.1016/j.biotechadv.2017.05.006
https://doi.org/10.18063/ijb.v5i1.173
23. Khansari MM, Sorokina LV, Mukherjee P, et al., 2017, 31. Kahin K, Khan Z, Albagami M, et al., 2019, Development of a
Classification of hydrogels based on their source: A review robotic 3D bioprinting and microfluidic pumping system for
and application in stem cell regulation. JOM, 69: 1340–1347.
tissue and organ engineering. In: Gray BL, Becker H, editors.
https://doi.org/10.1007/s11837-017-2412-9 Microfluidics, BioMEMS, and Medical Microsystems XVII
(SPIE, 2019).
24. Anandakrishnan N, Ye H, Guo Z, et al., 2020, Fast 3D
printing of large-scale biocompatible hydrogel models. https://doi.org/10.1117/12.2507237
BioRxiv, 2020: 345660.
32. Khan Z, Kahin K, Hauser C, 2021, Time-dependent
https://doi.org/10.1101/2020.10.22.345660 pulsing of microfluidic pumps to enhance 3D bioprinting
of peptide bioinks. In: Gray BL, Becker H, editors.
25. Morioka M, Sakakibara S, 2010, A new cell production
assembly system with human-robot cooperation. CIRP Ann, Microfluidics, BioMEMS, and Medical Microsystems XIX
59: 9–12. (SPIE, 2021).
https://doi.org/10.1117/12.2578830
26. Bhatt PM, Malhan RK, Shembekar AV, et al., 2020,
Expanding capabilities of additive manufacturing through 33. Ng WL, Chua CK, Shen YF, 2019, Print me an organ! Why
use of robotics technologies: A survey. Addit Manuf, we are not there yet. Prog Polym Sci, 97: 101145.
31: 100933.
https://doi.org/10.1016/j.progpolymsci.2019.101145
https://doi.org/10.1016/j.addma.2019.100933
34. Hinton TJ, Jallerat Q, Palchesko RN, et al., 2015, Three-
27. Urhal P, Weightman A, Diver C, et al., 2019, Robot assisted dimensional printing of complex biological structures by
additive manufacturing: A review. Robot. Comput Integr freeform reversible embedding of suspended hydrogels. Sci
Manuf, 59: 335-345. Adv, 1: e1500758.
https://doi.org/10.1016/j.rcim.2019.05.005 https://doi.org/10.1126/sciadv.1500758

Volume 1 Issue 1 (2022) 9 https://doi.org/10.18063/msam.v1i1.7