Page 32 - MSAM-3-3

Materials Science in Additive Manufacturing Defects in additively fabricated Al6061

doi: 10.1504/IJMMS.2023.133390 inline coherent imaging. Addit Manuf. 2020;32:100978.
4. Wang W, Ning J, Liang SY. Analytical prediction of balling, doi: 10.1016/j.addma.2019.100978
lack-of-fusion and keyholing thresholds in powder bed
fusion. Appl Sci. 2021;11(24):12053. 14. Townsend A, Racasan R, Leach R, et al. An interlaboratory
comparison of X-ray computed tomography measurement
doi: 10.3390/app112412053 for texture and dimensional characterisation of additively
5. Yakout M, Phillips I, Elbestawi MA, Fang Q. In-situ manufactured parts. Addit Manuf. 2018;23:422-432.
monitoring and detection of spatter agglomeration and doi: 10.1016/j.addma.2018.08.013
delamination during laser-based powder bed fusion of Invar
36. Opt Laser Technol. 2021;136:106741. 15. Du Plessis A, Yadroitsava I, Yadroitsev I. Effects of defects
on mechanical properties in metal additive manufacturing:
doi: 10.1016/j.optlastec.2020.106741 A review focusing on X-ray tomography insights. Mater Des.
6. Fu Y, Downey AR, Yuan L, Zhang T, Pratt A, Balogun Y. 2020;187:108385.
Machine learning algorithms for defect detection in metal doi: 10.1016/j.matdes.2019.108385
laser-based additive manufacturing: A review. J Manuf
Processes. 2022;75:693-710. 16. Özel T, Altay A, Kaftanoğlu B, Leach R, Senin N, Donmez
A. Focus variation measurement and prediction of surface
doi: 10.1016/j.jmapro.2021.12.061 texture parameters using machine learning in laser powder
7. Kouraytem N, Chiang PJ, Jiang R, et al. Solidification crack bed fusion. J Manuf Sci Eng. 2020;142(1):011008.
propagation and morphology dependence on processing doi: 10.1115/1.4045415
parameters in AA6061 from ultra-high-speed x-ray
visualization. Addit Manuf. 2021;42:101959. 17. Kim FH, Pintar A, Obaton AF, Fox J, Tarr J, Donmez A.
Merging experiments and computer simulations in X-ray
doi: 10.1016/j.addma.2021.101959
Computed Tomography probability of detection analysis of
8. Mehta A, Zhou L, Huynh T, et al. Additive manufacturing additive manufacturing flaws. NDT E Int. 2021;119:102416.
and mechanical properties of the dense and crack free doi: 10.1016/j.ndteint.2021.102416
Zr-modified aluminum alloy 6061 fabricated by the laser-
powder bed fusion. Addit Manuf. 2021;41:101966. 18. Rees DT, Leung CL, Elambasseril J, et al. In situ X-ray
imaging of hot cracking and porosity during LPBF of
9. Zhang J, Song B, Zhang L, Liu J, Shi Y. Selective laser melting
of Al6061 alloy: Processing, Microstructure, and Mechanical Al-2139 with TiB2 additions and varied process parameters.
Properties. In: Solid Freeform Fabrication 2018: Proceedings Mater Des. 2023;231:112031.
of the 29 Annual International Solid Freeform Fabrication doi: 10.1016/j.matdes.2023.112031
th
Symposium - an Additive Manufacturing Conference; 2018.
p. 1253-1261. 19. Zhao C, Fezzaa K, Cunningham RW, et al. Real-time
monitoring of laser powder bed fusion process using high-
doi: 10.26153/tsw/17123 speed X-ray imaging and diffraction. Sci Rep. 2017;7(1):3602.
10. Ghasemi-Tabasi H, de Formanoir C, Van Petegem S, et al. doi: 10.1038/s41598-017-03761-2
Direct observation of crack formation mechanisms with
operando Laser Powder Bed Fusion X-ray imaging. Addit 20. Uddin SZ, Murr LE, Terrazas CA, Morton P, Roberson DA,
Manuf. 2022;51:102619. Wicker RB. Processing and characterization of crack-free
aluminum 6061 using high-temperature heating in laser
doi: 10.1016/j.addma.2022.102619 powder bed fusion additive manufacturing. Addit Manuf.
11. Townsend A, Senin N, Blunt L, Leach RK, Taylor JS. Surface 2018;22:405-415.
texture metrology for metal additive manufacturing: doi: 10.1016/j.addma.2018.05.047
A review. Precis Eng. 2016;46:34-47.
21. Opprecht M, Garandet JP, Roux G, Flament C, Soulier M.
doi: 10.1016/j.precisioneng.2016.06.001 A solution to the hot cracking problem for aluminium
12. Li Z, Liu X, Wen S, et al. In situ 3D monitoring of alloys manufactured by laser beam melting. Acta Mater.
geometric signatures in the powder-bed-fusion additive 2020;197:40-53.
manufacturing process via vision sensing methods. Sensors. doi: 10.1016/j.actamat.2020.07.015
2018;18(4):1180.
22. Criales LE, Arısoy YM, Lane B, Moylan S, Donmez A,
doi: 10.3390/s18041180 Özel T. Laser powder bed fusion of nickel alloy 625:
13. Fleming TG, Nestor SG, Allen TR, Boukhaled MA, Experimental investigations of effects of process parameters
Smith NJ, Fraser JM. Tracking and controlling the on melt pool size and shape with spatter analysis. Int J Mach
morphology evolution of 3D powder-bed fusion in situ using Tools Manuf. 2017;121:22-36.

Volume 3 Issue 3 (2024) 14 doi: 10.36922/msam.3652