Page 57 - MSAM-3-3

Materials Science in Additive Manufacturing MEX optimization printing of rHPDE from milk jugs

materials-4-polyethylene-for-food-packaging-applications 16. Dahlbo H, Poliakova V, Mylläri V, Sahimaa O, Anderson R.
[Last accessed on 2024 May 24]. Recycling potential of post-consumer plastic packaging
10. Manrich S, Santos ASF. Plastic Recycling. United States: Nova waste in Finland. Waste Manag. 2018;71:52-61.
Science Publishers Inc.; 2008. doi: 10.1016/j.wasman.2017.10.033
11. Yadav A, Rohru P, Babbar A, et al. Fused filament 17. Sun Q, Rizvi GM, Bellehumeur CT, Gu P. Effect of processing
fabrication: A state-of-the-art review of the technology, conditions on the bonding quality of FDM polymer
materials, properties and defects. Int J Interact Des Manuf. filaments. Rapid Prototyp J. 2008;14(2):72-80.
2023;17(6):2867-2889.
doi: 10.1108/13552540810862028
doi: 10.1007/s12008-022-01026-5
18. Filabot. Filabot Original and Filabot EX2 Operation
12. Ang KC, Leong KF, Chua CK, Chandrasekaran M. Manual; 2023. Available from: https://cdn.shopify.com/s/
Investigation of the mechanical properties and porosity files/1/0236/7897/files/exogmr1.pdf [Last accessed on
relationships in fused deposition modelling-fabricated 2024 May 24].
porous structures. Rapid Prototyp J. 2006;12(2):100-105.
19. Takatori E, Shimura T, Adachi T, Yao S, Shindoh Y. Tensile
doi: 10.1108/13552540610652447 properties, morphology and rheological properties of a
13. Sheth S. Make Your Own 3D Printing Filament Using recycled HDPE. Nihon Reoroji Gakkaishi. 2014;42(1):45-49.
Recycled Plastic Bottles; 2013. Available from: https:// doi: 10.1678/rheology.42.45
www.yankodesign.com/2023/07/26/make-your-own-3d-
printing-filament-using-recycled-plastic-bottles [Last 20. Chrysafi I, Asimakidou T, Michailidou G, et al.
accessed on 2024 May 24]. Characterization of the thermal, structural, and
mechanical properties of recycled HDPE. Macromol
14. Nophead. Sticking Point; 2007. Available from: https:// Symp. 2022;405(1):2100224.
hydraraptor.blogspot.com/2007/10/sticking-point.html
[Last accessed on 2024 May 24]. doi: 10.1002/masy.202100224
15. Gudadhe A, Bachhar N, Kumar A, Andrade P, 21. Zhang J, Hirschberg V, Goecke A, et al. Effect of mechanical
Kumaraswamy G. Three-dimensional printing with recycling on molecular structure and rheological
waste high-density polyethylene. ACS Appl Polym Mater. properties of high-density polyethylene (HDPE). Polymer.
2019;1(11):3157-3164. 2024;297:126866.
doi: 10.1021/acsapm.9b00813 doi: 10.1016/j.polymer.2024.126866

Volume 3 Issue 3 (2024) 14 doi: 10.36922/msam.4084