Page 102 - ESAM-1-2

Engineering Science in
Additive Manufacturing Impact of machine factors on PBF part surface quality

37. Simm TH, Sun L, Galvin DR, et al. The effect of a 40. Tan C, Zhou K, Ma W, Zhang P, Liu M, Kuang T. Microstructural
two-stage heat-treatment on the microstructural and evolution, nanoprecipitation behavior and mechanical
mechanical properties of a maraging steel. Materials (Basel). properties of selective laser melted high-performance
2017;10(12):1346. grade 300 maraging steel. Mater Des. 2017;134:23-34.
doi: 10.3390/ma10121346 doi: 10.1016/j.matdes.2017.08.026
38. Monkova K, Zetkova I, Kučerová L, et al. Study of 3D 41. Mooney B, Kourousis KI, Raghavendra R. Plastic anisotropy
printing direction and effects of heat treatment on of additively manufactured maraging steel: Influence of
mechanical properties of MS1 maraging steel. Arch Appl the build orientation and heat treatments. Addit Manuf.
Mech. 2019;89:791-804. 2019;25:19-31.
doi: 10.1007/s00419-018-1389-3 doi: 10.1016/j.addma.2018.10.032
39. Mutua J, Nakata S, Onda T, Chen ZC. Optimization of 42. Bai Y, Yang Y, Wang D, Zhang M. Influence mechanism of
selective laser melting parameters and influence of post heat parameters process and mechanical properties evolution
treatment on microstructure and mechanical properties of mechanism of maraging steel 300 by selective laser melting.
maraging steel. Mater Des. 2018;139:486-497. Mater Sci Eng A. 2017;703:116-123.
doi: 10.1016/j.matdes.2017.11.042 doi: 10.1016/j.msea.2017.06.033

Volume 1 Issue 2 (2025) 9 doi: 10.36922/ESAM025240014