Page 438 - IJB-10-1

International Journal of Bioprinting Mechanically biomimicking 3D bone model

Writing – original draft: Ju Chan Yuk doi: 10.1016/j.addma.2022.102863
Writing – review & editing: Suk Hee Park, Kyoung 7. Lee JE, Park SJ, Son Y, Park K, Park S-H. Mechanical
Hyup Nam reinforcement of additive-manufactured constructs using
in situ auxiliary heating process. Addit Manuf. 2021;43:
Ethics approval and consent to participate 101995.
doi: 10.1016/j.addma.2021.101995
The use of cadaver specimens in this study was approved
by Pusan National University and reviewed by its own 8. Park SJ, Park SJ, Son Y, Hyuk Ahn I. Reducing anisotropy
internal committee. Institutional Review Board (IRB) at of a part fabricated by material extrusion via warm isostatic
Pusan National University Hospital approved the study pressure (WIP) process. Addit Manuf. 2022;55:102841.
protocol and the use of anonymous cadaveric temporal doi: 10.1016/j.addma.2022.102841
bones in this study (approval IRB no: 2306-031-128). 9. Park SJ, Lee JE, Park J, Lee N-K, Son Y, Park S-H. High-
temperature 3D printing of polyetheretherketone products:
Consent for publication Perspective on industrial manufacturing applications of
super engineering plastics. Mater Design. 2021;211:110163.
Not applicable. doi: 10.1016/j.matdes.2021.110163
10. Zhu J, Zhou H, Wang C, et al. A review of topology
Availability of data optimization for additive manufacturing: Status and
Not applicable. challenges. Chinese J Aeronaut. 2021;34(1):91-110.
doi 10.1016/j.cja.2020.09.020
Further disclosure 11. Wang P, Song J, Nai MLS, Wei J. Experimental analysis of
additively manufactured component and design guidelines
Part of the findings has been presented in the Korean for lightweight structures: A case study using electron beam
Society for Precision Engineering Autumn Conference, melting. Addit Manuf. 2020;33:101088.
Daegu, Korea, October 19–21, 2022. doi: 10.1016/j.addma.2020.101088
12. Springer H, Baron C, Mostaghimi F, Poveleit J, Mädler L,
References Uhlenwinkel V. Additive manufacturing of high modulus
steels: New possibilities for lightweight design. Addit Manuf.
1. Daminabo SC, Goel S, Grammatikos SA, Nezhad HY, 2020;32:101033.
Thakur VK. Fused deposition modeling-based additive doi: 10.1016/j.addma.2019.101033
manufacturing (3D printing): Techniques for polymer
material systems. Mater Today Chem. 2020;16:100248. 13. Chen W, Watts S, Jackson JA, Smith WL, Tortorelli DA.
doi: 10.1016/j.mtchem.2020.100248 Spadaccini CM. Stiff isotropic lattices beyond the Maxwell
criterion. Sci Adv. 2019;5(9):eaaw1937.
2. Peng X, Kuang X, Roach DJ, et al. Integrating digital doi: 10.1126/sciadv.aaw1937
light processing with direct ink writing for hybrid 3D
printing of functional structures and devices. Addit Manuf. 14. Gobbi SJ, Gobbi VJ, Rocha Y. Requirements for selection/
2021;40:101911. development of a biomaterial. Biomed J Sci Tech Res.
doi: 10.1016/j.addma.2021.101911 2019;14(3):1-6.
doi: 10.26717/BJSTR.2019.14.002554
3. Mitra I, Bose S, Dernell WS, et al. 3D printing in alloy design 15. Banse X, Sims TJ, Bailey AJ. Mechanical properties
to improve biocompatibility in metallic implants. Mater of adult vertebral cancellous bone: Correlation with
Today. 2021;45:20-34.
doi: 10.1016%2Fj.mattod.2020.11.021 collagen intermolecular cross‐links. J Bone Miner Res.
2002;17(3):1621-1628.
4. Kim H, Lin Y, Tseng TLB. A review on quality control in doi: 10.1359/jbmr.2002.17.9.1621
additive manufacturing. Rapid Prototyp J. 2018;24(3).
doi: 10.1108/RPJ-03-2017-0048 16. Roy ME, Rho JY, Tsui TY, Evans ND, Pharr GM.
Mechanical and morphological variation of the human
5. Andreu A, Kim S, Dittus J, et al. Hybrid material extrusion lumbar vertebral cortical and trabecular bone. J Biomed
3D printing to strengthen interlayer adhesion through hot Mater Res. 1999;44(2):191-197.
rolling. Addit Manuf. 2022;55:102773. doi: 10.1002/(sici)1097-4636(199902)44:2%3C191::aid-
doi: 10.1016/j.addma.2022.102773 jbm9%3E3.0.co;2-g
6. Kan WH, Jiang D, Humbert M. Effect of in-situ layer-by- 17. Gu XN, Zheng YF. A review on magnesium alloys
layer rolling on the microstructure, mechanical properties, as biodegradable materials. Front Mater Sci China.
and corrosion resistance of a directed energy deposited 316L 2010;4:111.
stainless steel. Addit Manuf. 2022;55:102863. doi: 10.1007/s11706-010-0024-1

Volume 10 Issue 1 (2024) 430 https://doi.org/10.36922/ijb.1067