Page 48 - IJB-2-1

Utilising inkjet printed paraffin wax for cell patterning applications

32. Li Z, Hou L, Zhang W, et al., 2014, Preparation of 35. Li R, Ashgriz N, Chandra S, et al., 2008, Shape and
PDMS microfluidic devices based on drop-on-demand surface texture of molten droplets deposited on cold
generation of wax molds. Analytical Methods, vol.6(13): surfaces. Surface and Coatings Technology, vol.202(16):
4716–4722. 3960–3966.
http://dx.doi.org/10.1039/c4ay00798k http://dx.doi.org/10.1016/j.surfcoat.2008.02.009
33. Simon K A, Park K M, Mosadegh B, et al., 2014, Poly- 36. Stringer J and Derby B, 2010, Formation and stability of
mer-based mesh as supports for multi-layered 3D cell lines produced by inkjet printing. Langmuir, vol.26(12):
culture and assays. Biomaterials, vol.35: 259–268. 10365–10372.
http://dx.doi.org/10.1016/j.biomaterials.2013.09.049 http://dx.doi.org/10.1021/la101296e
34. De Gans B-J and Schubert U S, 2004, Inkjet printing of 37. Schiaffino S and Sonin A, 1997, Molten droplet deposi-
well-defined polymer dots and arrays. Langmuir, tion and solidification at low Weber numbers. Physics of
vol.20(18): 7789–7793. Fluids, vol.9(11): 3172–3187.
http://dx.doi.org/10.1021/la049469o http://dx.doi.org/10.1063/1.869434

44 International Journal of Bioprinting (2016)–Volume 2, Issue 1