Page 112 - IJB-5-2

A methodology to develop a vascular geometry for in vitro cell culture using additive manufacturing
14. Wong KV, Hernandez A, 2012, A Review of Additive 20. Ozbolat V, Dey M, Ayan B, et al., 2018, 3D Printing of PDMS
Manufacturing. ISRN Mech Eng, 2012:1-10. Improves Its Mechanical and Cell Adhesion Properties.
15. Noorani RI, 2006, Rapid Prototyping: Principles and ACS Biomater Sci Eng, 4(2):682-93. DOI 10.1021/
Applications. Los Angeles: John Wiley and Sons. acsbiomaterials.7b00646.
16. Ponche R, Hascoet JY, Kerbrat O, et al., 2012, A New Global 21. Lachaux J, Alcaine C, Gómez-Escoda B, et al., 2017,
Approach to Design for Additive Manufacturing. Virtual Thermoplastic Elastomer with Advanced Hydrophilization
Phys Prototyp, 7(2):93-105. and Bonding Performances for Rapid (30 s) and Easy
17. Mcdonald JC, Duffy DC, Anderson JR, et al., 2000, Fabrication Molding of Microfluidic Devices. Lap Chip, 17:2581-94.
of Microfluidic Systems in Poly (Dimethylsiloxane). DOI 10.1039/c7lc00488e.
Electrophoresis, 21(1):27-40. DOI 10.1002/(sici)1522-2683 22. Lu Z, Jiang X, Zuo X, et al., 2016, Improvement of
(20000101)21:1<27:aid-elps27>3.0.co;2-c. Cytocompatibility of 3D-printing Resins for Endothelial Cell
18. Kaihara S, Borenstein J, Koka R, et al., 2000, Silicon Adhesion. RSC Adv, 6(104):102381-8. DOI 10.1039/c6ra20700f.
Micromachining to Tissue Engineer Branched Vascular 23. Lenoir L, Segonds F, Bartolucci P, et al., 2019, A Methodology
Channels for Liver Fabrication. Tissue Eng, 6:105-17. to Product a Complex Vascular Geometry Using Mainly
DOI 10.1089/107632700320739. Additive Manufacturing. Paris: CONFERE.
19. Shin M, Matsuda K, Ishii O, et al., 2004, Endothelialized 24. Peace D, 2017, Chapter 1: Neuro-ophthalmic anatomy.
Networks with a Vascular Geometry in Microfabricated Fastest Otolaryngol Ophthalmol Insight Eng, 1: 1-8.
Poly(Dimethyl Siloxane). Biomed Microdevices, 6:269-78. 25. Vignon I, 2018, Carotid Angiography-MRI Model. Inria:
DOI 10.1023/b: bmmd.0000048559.29932.27. Internal Report.

108 International Journal of Bioprinting (2019)–Volume 5, Issue 2