Page 61 - IJB-8-3

Noroozi, et al.:
Engineering Applications: An Optimization Approach toward 48. Al-Ketan O, Abu Al-Rub RK, 2019, Multifunctional
Biomimetic Scaffold Design. ACS Appl Bio Mater, 1:259–69. Mechanical Metamaterials Based on Triply Periodic Minimal
38. Yan C, Hao L, Hussein A, et al., 2015, Ti-6Al-4V Triply Surface Lattices. Adv Eng Mater, 21:1900524.
Periodic Minimal Surface Structures for Bone Implants 49. Restrepo S, Ocampo-Gutiérrez S, Ramírez JA, et al., 2017,
Fabricated Via Selective Laser Melting. J Mech Behav Mechanical Properties of Ceramic Structures Based on Triply
Biomed Mater, 51:61–73. Periodic Minimal Surface (TPMS) Processed by 3D Printing.
39. Yang L, Yan C, Han C, et al., 2018, Mechanical Response of a J Phys Conf Ser, 935:012036.
Triply Periodic Minimal Surface Cellular Structures Manufactured 50. Liao B, Xia RF, Li W, et al., 2021, 3D-Printed Ti6Al4V Scaffolds
by Selective Laser Melting. Int J Mech Sci, 148:149–57. with Graded Triply Periodic Minimal Surface Structure for
40. Ma S, Tang Q, Han X, et al., 2020, Manufacturability, Bone Tissue Engineering. J Mater Eng Perform, 30:4993-5004.
Mechanical Properties, Mass-transport Properties and 51. Abueidda DW, Bakir M, Abu Al-Rub RK, et al., 2017,
Biocompatibility of Triply Periodic Minimal Surface (TPMS) Mechanical Properties of 3D Printed Polymeric Cellular
Porous Scaffolds Fabricated by Selective Laser Melting. Materials with Triply Periodic Minimal Surface Architectures.
Mater Des, 195:109034. Mater Des, 122:255–67.
41. Pires T, Santos J, Ruben RB, et al., 2021, Numerical- 52. Liu F, Mao Z, Zhang P, et al., 2018, Functionally Graded
experimental Analysis of the Permeability-porosity Porous Scaffolds in Multiple Patterns: New Design Method,
Relationship in Triply Periodic Minimal Surfaces Scaffolds. Physical and Mechanical Properties. Mater Des, 160:849–60.
J Biomech, 117:110263. 53. Ma S, Song K, Lan J, et al., 2020, Biological and Mechanical
42. Charbonnier B, Manassero M, Bourguignon M, et al., 2020, Property Analysis for Designed Heterogeneous Porous
Custom-made Macroporous Bioceramic Implants Based on Scaffolds Based on the Refined TPMS. J Mech Behav Biomed
Triply-periodic Minimal Surfaces for Bone Defects in Load- Mater, 107:103727.
bearing Sites. Acta Biomater, 109:254–66. 54. Jiang W, Liao W, Liu T, et al., 2021, A Voxel-based Method of
43. Al-Ketan O, Ali M, Khalil M, et al., 2021, Forced Convection Multiscale Mechanical Property Optimization for the Design
Computational Fluid dynamics Analysis of Architected and of Graded TPMS Structures. Mater Des, 2021:109655.
Three-dimensional Printable Heat Sinks Based on Triply 55. Alberdi, R., Dingreville R, Robbins J, et al., 2020, Multi-
Periodic Minimal Surfaces. J Therm Sci Eng Appl, 13:1-33. morphology Lattices Lead to Improved Plastic Energy
44. Song K, Wang Z, Lan J, et al., 2021, Porous Structure Design Absorption. Mater Des, 194:108883.
and Mechanical Behavior Analysis Based on TPMS for 56. Benedetti M, du Plessis A, Ritchie RO, et al., 2021, Architected
Customized Root Analogue Implant. J Mech Behav Biomed Cellular Materials: A Review on their Mechanical Properties
Mater, 115:104222. towards Fatigue-tolerant Design and Fabrication. Mater Sci
45. Zhang L, Feih S, Daynes S, et al., 2018, Energy Absorption Eng R Rep, 144:100606.
Characteristics of Metallic Triply Periodic Minimal Surface 57. Abbasi N, Hamlet S, Love RM, et al., 2020, Porous Scaffolds
Sheet Structures under Compressive Loading. Addit Manuf, for Bone Regeneration. J Sci Adv Mater Dev, 5:1–9.
23:505–15. 58. Sengers, B., Please CP, Taylor M, et al., 2009, Experimental-
46. Al-Ketan O, Lee DW, Rowshan R, et al., 2020, Functionally computational Evaluation of Human Bone Marrow Stromal
Graded and Multi-morphology Sheet TPMS Lattices: Design, Cell Spreading on Trabecular Bone Structures. Ann Biomed
Manufacturing, and Mechanical Properties. J Mech Behav Eng, 37:1165–76.
Biomed Mater, 102:103520. 59. Ashby MF, Medalist RM, 1983, The Mechanical Properties
47. Maskery I, Strum L, Aremu AO, et al., 2018, Insights into of Cellular Solids. Metallurg Trans A, 14:1755–69.
the Mechanical Properties of Several Triply Periodic Minimal 60. Tiderius CJ, Olsson LE, de Verdier H, et al., 2011, Gd-DTPA2-
Surface Lattice Structures Made by Polymer Additive enhanced MRI of Femoral Knee Cartilage: A Dose-response
Manufacturing. Polymer, 152:62–71. Study in Healthy Volunteers. Magn Reson Med, 46:1067–71.

Publisher’s note
Whioce Publishing remains neutral with regard to
jurisdictional claims in published maps and institutional
affiliations.

International Journal of Bioprinting (2022)–Volume 8, Issue 3 53