Page 174 - IJB-9-6

International Journal of Bioprinting 3D printing in gastroenterology

16. Marano L, Ricci A, Savelli V, et al., 2019, From digital world 26. Guz W, Ożóg Ł, Aebisher D, et al., 2021, The use of magnetic
to real life: A robotic approach to the esophagogastric resonance imaging technique and 3D printing in order to
junction with a 3D printed model. BMC Surg, 19(1): 153. develop a three-dimensional fistula model for patients with
Crohn’s disease: Personalised medicine. Prz Gastroenterol,
http://doi.org/10.1186/s12893-019-0621-6
16(1): 83–88.
17. Garcia-Granero A, Sánchez-Guillén L, Fletcher-Sanfeliu D,
et al., 2018, Application of three-dimensional printing in http://doi.org/10.5114/pg.2020.101629
laparoscopic dissection to facilitate D3-lymphadenectomy 27. Sahnan K, Adegbola SO, Tozer PJ, et al., 2018, Innovation
for right colon cancer. Tech Coloproctol, 22(2): 129–133. in the imaging perianal fistula: A step towards personalised
medicine. Therap Adv Gastroenterol, 11: 1756284818775060.
http://doi.org/10.1007/s10151-018-1746-9
http://doi.org/10.1177/1756284818775060
18. Hojo D, Nishikawa T, Takayama T, et al., 2019, 3D printed
model-based simulation of laparoscopic surgery for 28. Hojo D, Kawai K, Murono K, et al., 2021, Establishment
descending colon cancer with a concomitant abdominal of deformable three-dimensional printed models for
aortic aneurysm. Tech Coloproctol, 23(8): 793–797. laparoscopic right hemicolectomy in transverse colon
cancer. ANZ J Surg, 91(7–8): E493–E499.
http://doi.org/10.1007/s10151-019-02060-4
http://doi.org/10.1111/ans.16659
19. Hamabe A, Ito M, 2017, A three-dimensional pelvic model
made with a three-dimensional printer: Applications for 29. Oxford K, Walsh G, Bungay J, et al., 2021, Development,
laparoscopic surgery to treat rectal cancer. Tech Coloproctol, manufacture and initial assessment of validity of a
21(5): 383–387. 3-dimensional-printed bowel anastomosis simulation
training model. Can J Surg, 64(5): E484–E490.
http://doi.org/10.1007/s10151-017-1622-z
http://doi.org/10.1503/cjs.018719
20. Igami T, Nakamura Y, Hirose T, et al., 2014, Application
of a three-dimensional print of a liver in hepatectomy for 30. Barber SR, Kozin ED, Naunheim MR, et al., 2018, 3D-printed
small tumors invisible by intraoperative ultrasonography: tracheoesophageal puncture and prosthesis placement
Preliminary experience. World J Surg, 38(12): 3163–3166. simulator. Am J Otolaryngol, 39(1): 37–40.
http://doi.org/10.1007/s00268-014-2740-7 http://doi.org/10.1016/j.amjoto.2017.08.001
21. Witowski JS, Pędziwiatr M, Major P, et al., 2017, 31. Williams A, McWilliam M, Ahlin J, et al., 2018, A simulated
Cost-effective, personalized, 3D-printed liver model training model for laparoscopic pyloromyotomy: Is 3D
for preoperative planning before laparoscopic liver printing the way of the future? J Pediatr Surg, 53(5):
hemihepatectomy for colorectal cancer metastases. Int J 937–941.
Comput Assist Radiol Surg, 12(12): 2047–2054.
http://doi.org/10.1016/j.jpedsurg.2018.02.016
http://doi.org/10.1007/s11548-017-1527-3
32. Nishihara Y, Isobe Y, Kitagawa Y, 2017, Validation of newly
22. Sun G, Ding B, Yu G, et al., 2020, Three-dimensional developed physical laparoscopy simulator in transabdominal
printing - Assisted planning for complete and safe resection preperitoneal (TAPP) inguinal hernia repair. Surg Endosc,
of retroperitoneal tumor. J X-ray Sci Technol, 28(3): 471–480. 31(12): 5429–5435.
http://doi.org/10.3233/xst-190636 http://doi.org/10.1007/s00464-017-5614-x
23. Park S, Choi GS, Kim JM, et al., 2022, 3D printing model 33. Jeffries S, Watt A, Harutyunyan R, et al., 2022, The
of abdominal cavity of liver transplantation recipient to development of a novel bariatric laparoscopic simulator.
prevent large-for-size syndrome. Int J Bioprint, 8(4): 609. Ann Int Conf IEEE Eng Med Biol Soc, 2022: 633–636.
http://doi.org/10.18063/ijb.v8i4.609 http://doi.org/10.1109/embc48229.2022.9871246
24. Villarreal JA, Yoeli D, Masand PM, et al., 2020, Hepatic 34. Casas-Murillo C, Zuñiga-Ruiz A, Lopez-Barron RE, et al.,
separation of conjoined twins: Operative technique and 2021, 3D-printed anatomical models of the cystic duct
review of three-dimensional model utilization. J Pediatr and its variants, a low-cost solution for an in-house built
Surg, 55(12): 2828–2835. simulator for laparoscopic surgery training. Surg Radiol
Anat, 43(4): 537–544.
http://doi.org/10.1016/j.jpedsurg.2020.06.047
http://doi.org/10.1007/s00276-020-02631-3
25. Huang JJ, Ren JA, Wang GF, et al., 2017, 3D-printed “fistula
stent” designed for management of enterocutaneous fistula: 35. Anwari V, Lai A, Ursani A, et al., 2020, 3D printed CT-based
An advanced strategy. World J Gastroenterol, 23(41): 7489– abdominal structure mannequin for enabling research. 3D
7494. Print Med, 6(1): 3.
http://doi.org/10.3748/wjg.v23.i41.7489 http://doi.org/10.1186/s41205-020-0056-9

Volume 9 Issue 6 (2023) 166 https://doi.org/10.36922/ijb.0149