Page 216 - IJB-9-4

International Journal of Bioprinting b-Ti21S TPMS FGPs produced by laser powder bed fusion

53. Yang L, Wu S, Yan C, et al., 2021, Fatigue properties of element analysis and neural networks approaches. J Compos
Ti-6Al-4V Gyroid graded lattice structures fabricated by Sci, 3:33.
laser powder bed fusion with lateral loading. Addit Manuf, https://doi.org/10.3390/JCS3020033
46:102214.
65. Kim HS, Al-Hassani STS, 2003, Effective elastic constants of
https://doi.org/10.1016/J.ADDMA.2021.102214
two-dimensional cellular materials with deep and thick cell
54. Kelly CN, Wang T, Crowley J, et al., 2021, High-strength, walls. Int J Mech Sci, 45:1999–2016.
porous additively manufactured implants with optimized https://doi.org/10.1016/J.IJMECSCI.2004.02.002
mechanical osseointegration. Biomaterials, 279:121206.
66. Webb DC, Kormi K, Al-Hassani STS, 1995, Use of FEM
https://doi.org/10.1016/j.biomaterials.2021.121206 in performance assessment of perforated plates subject
55. Zhang J, Chen X, Sun Y, et al., 2022, Design of a biomimetic to general loading conditions. Int J Press Vessel Pip, 64:
graded TPMS scaffold with quantitatively adjustable pore 137–152.
size. Mater Des, 218:110665. https://doi.org/10.1016/0308-0161(94)00078-W

https://doi.org/10.1016/J.MATDES.2022.110665 67. Murchio S, Dallago M, Zanini F, et al., 2021, Additively
56. de Galarreta SR, Doyle RJ, Jeffers J, et al., 2021, Laser powder manufactured Ti–6Al–4V thin struts via laser powder
bed fusion of porous graded structures: A comparison bed fusion: Effect of building orientation on geometrical
between computational and experimental analysis. J Mech accuracy and mechanical properties. J Mech Behav Biomed
Behav Biomed Mater, 123:104784. Mater, 119:104495.
https://doi.org/10.1016/J.JMBBM.2021.104784 https://doi.org/10.1016/J.JMBBM.2021.104495
57. Hildebrand T, Rüegsegger P, 1997, A new method for the 68. Gordon JV, Narra SP, Cunningham RW, et al., 2020, Defect
model-independent assessment of thickness in three- structure process maps for laser powder bed fusion additive
dimensional images. J Microsc, 185:67–75. manufacturing. Addit Manuf, 36:101552.
https://doi.org/10.1016/J.ADDMA.2020.101552
https://doi.org/10.1046/J.1365-2818.1997.1340694.X
69. Abdulhadi HS, Mian A, 2019, Effect of strut length and
58. Kolken HMA, Garcia AF, Du Plessis A, et al., 2021, Fatigue
performance of auxetic meta-biomaterials. Acta Biomater, orientation on elastic mechanical response of modified
126:511–523. body-centered cubic lattice structures. Proc Inst Mech Eng
Part L: J Mater Des Appl, 233:2219–2233.
https://doi.org/10.1016/j.actbio.2021.03.015
https://doi.org/10.1177/1464420719841084
59. ASTM-E407 | Standard Practice for Microetching Metals 70. Alkhatib SE, Tarlochan F, Mehboob H, et al., 2019, Finite
and Alloys | Document Center, Inc.
element study of functionally graded porous femoral stems
60. ISO - ISO 13314:2011 - Mechanical testing of metals— incorporating body-centered cubic structure. Artif Organs,
Ductility testing—Compression test for porous and cellular 43:E152–E164.
metals.
https://doi.org/10.1111/AOR.13444
61. Benedetti M, Klarin J, Johansson F, et al., 2019, Study of the 71. Yang L, Li Y, Wu S, et al., 2022, Tailorable and predictable
compression behaviour of Ti6Al4V trabecular structures mechanical responses of additive manufactured TPMS
produced by additive laser manufacturing. Materials lattices with graded structures. Mater Sci Eng A, 843:143109.
(Basel), 12:1471.
https://doi.org/10.1016/J.MSEA.2022.143109
https://doi.org/10.3390/MA12091471
72. Lv Y, Wang B, Liu G, et al., 2022, Design of bone-like
62. Benedetti M, Galeotti F, Emanuelli L, et al., 2019, continuous gradient porous scaffold based on triply periodic
Deformation behaviour of Ti-6Al-4V trabecular structures minimal surfaces. J Mater Res Technol, 21:3650–3665.
produced by additive laser manufacturing. Euro PM 2019
Congr Exhib. https://doi.org/10.1016/J.JMRT.2022.10.160
63. Schmitz A, Horst P, 2014, A finite element unit-cell method 73. Belda R, Megías R, Marco M, et al., 2023, Numerical analysis
for homogenised mechanical properties of heterogeneous of the influence of triply periodic minimal surface structures
plates. Compos Part A Appl Sci Manuf, 61:23–32. morphometry on the mechanical response. Comput Methods
Programs Biomed, 230:107342.
https://doi.org/10.1016/J.COMPOSITESA.2014.01.014
https://doi.org/10.1016/J.CMPB.2023.107342
64. Alwattar TA, Mian A, 2019, Development of an elastic
material model for BCC lattice cell structures using finite

Volume 9 Issue 4 (2023) 208 https://doi.org/10.18063/ijb.729